Search for content and authors
 

Morphology of Al doped zinc oxide obtained by the vapour condensation method

Tomasz Strachowski 1,2,  Witold Łojkowski 1,  Ewa Grzanka 1,3,  Roman Pielaszek 1,  Adam M. Presz 1,  Robert R. Piticescu 4,  Claude J. Monty 5

1. Polish Academy of Sciences, Institute of High Pressure Physics (UNIPRESS), Sokolowska 29/37, Warszawa 01-142, Poland
2. Warsaw University of Technology, Faculty of Materials Science and Engineering (InMat), Wołoska 141, Warszawa 02-507, Poland
3. Warsaw University, Faculty of Physics, Hoża 69, Warszawa 00-681, Poland
4. Institute for Non-ferrous and Rare Metals, 102 Biruintei Blvd., Pantelimon 73957, Romania
5. CNRS laboratoire Procedes, Materiaux et Energie solaire (PROMES), BP5 Odeillo, Font-Romeu 66120, France

Abstract

The aim of this work is description of morphology of Al-doped ZnO obtained by the vapour condensation method. The morphology was analysed by complementary methods. Shape and grain size were analysed by SEM, XRD and BET. Density measurements used helium pycnometr method.

Dependence of density and lattice parameters on Al concentration is presented.

 

Legal notice
  • Legal notice:

    Copyright (c) Pielaszek Research, all rights reserved.
    The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
    In every case, proper references including Author(s) name(s) and URL of this webpage: https://science24.com/paper/6741 must be provided.

 

Related papers
  1. Initial abstract
  2. 2nd abstract
  3. Optical oxygen sensor for safe operation in hazardous areas
  4.   Optical oxygen sensor for safe operation  in hazardous areas
  5. Quo Vadis nanotechnology- for various stakeholders
  6. Opening of the Thursday Sessions of NanoPl 2014
  7. Microwave reactors for nanoparticle's synthesis
  8. Opening of Nano-Bio-Med session
  9. Real Time Characterisation of nanoMaterials
  10. Bioactive GoHAP nanoparticles and their applications in medical implants technology
  11. Wykorzystanie metody NTA (Nanoparticle Tracking Analysis) w ocenie wielkości krążących mikrocząstek osocza i innych płynów fizjologicznych: pułapki i triki
  12. Advanced characterisation of nanomaterials according to ISO 17025 Norm

  13. Microwave solvothermal synthesis of resorbable nano-HAp with controlled grain size.
  14. Microwave Solvothermal Synthesis of Nano Zinc Oxide Nanoparticles
  15. Microwave Solvothermal Technology (MSS) for nanoparticle synthesis
  16. Zaawansowana Charakteryzacja Nanocząstek
  17. [CEPT] Solvothermal synthesis nano zinc oxide in  microwave reactor MSS2
  18. [CEPT] Solvothermal synthesis and characterization of nanomaterials in the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials
  19. Scanning Electron Microscopy Investigations and Analysis of Nanostructures
  20. Polish Nanotechnology Platform - a discussion group at Linked-In
  21. Novel optical oxygen sensor for life and health protection made of nano-zirconia
  22. Nanometrology as a tool for nanotechnology problems solving
  23. Creating a Polish Nano-Bio-Technology and  Nano-Medicine Platform?
  24. MSS synthesis of highly biocompatible nano-HAP and coating of 3D poymer scaffolds
  25. Nanotechnologie w gospodarce województwa podlaskiego
  26. Characterization of nanomaterials according to EU recommendations, on the example of ZnO nanoparticles
  27. [CEPT] Nanohydroxyapatite-polylactide composites  for regenerative implants
  28. [CEPT] MSS synthesis of highly biocompatible nano-HAP with properties depending on the synthesis time.
  29. [CEPT] Studies of nanoparticles size distribution
  30. [CEPT] Studies of solubility of nanoparticles and stability of their suspension
  31. Iinvestigation of nanoparticles by DSC-TG methods accompanied by chemical analysis of emitted gas
  32. Reliable XRD characterization in production or high-throughput laboratory regime
  33. GaN substrates with variable surface miscut for laser diode applications
  34. Semipolar (2021) UV LEDs and LDs grown by PAMBE
  35. Presentation of the  Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT
  36. ZnO nanoparticles effect on integrity of human endothelial cells
  37. Importance and trends in nanomedicine according  European Nanomedicine Platform survey
  38. Application of the Zeiss Ultra Plus scanning microscopy in bio-nanotechnology 
  39. Welcome address
  40. Otwarcie NanoInfoDay, Powitanie
  41. Characteristic of hydroxyapatite dense nanoceramic produced by The High Pressure Consolidation  
  42. Wpływ parametrów materiałowo-technicznych na właściwości optycznego czujnika tlenu na bazie nano-ZrO2
  43. Synteza nano-ZnO przy pomocy reaktora Mettler Toledo w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT.
  44. Infrastruktura i specjalizacje nanotechnologii w Polsce na podstawie wyników ankiety NANOFORCE
  45. Solwotermalna synteza domieszkowanego nanotlenku cynku dla projektu NanoFATE. Otrzymywanie wodnych nanozawiesin domieszkowanego tlenku cynku.
  46. Nanotechnologia bezpieczna dla ludzi i przyjazna środowisku
  47. Badania rozkładu wielkości cząstek i potencjału zeta w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  48. Badanie stabilności i rozpuszczalności zawiesin z nano ZnO i nano ZnO:Co otrzymanych w  Laboratorium Nanostrutur dla Fotoniki i Nanomedycyny CePT
  49. Badania nanoproszków przy pomocy technik DSC-TG/ QMS-FTIR w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  50. Synthesis of highly biocompatible hydroxyapatite nanopowders
  51. Nanosafety - challenge of nowadays
  52. Influence of heat treatment on luminescence of ZrO2 + Eu nanopowders
  53. Solvothermal synthesis of doped nano zinc oxide for the project NanoFATE.
  54. Podsumowanie
  55. Solwotermalna synteza domieszkowanego nano tlenku cynku dla projektu NanoFATE.
  56. Hydrothermal Synthesis of Zinc Oxide Nanopowders
  57. Optyczny sensor tlenu na bazie nanokrystalicznego ZrO2
  58. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  59. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  60. Procedury charakteryzacji nanoproszków
  61. Oferty nanoproszków - Laboratorium Nanostruktur, Instytut Wysokich Ciśnien PAN
  62. Nanofotonika dla małych i średnich przedsiębiorstw - mapy dorogowe i analizy SWOT  najważniejszych technologii.
  63. Otwarcie konferencji
  64. Polska  Platforma Nanotechnologii i zarys strategicznego programu "Nanotechnologia i wzrost inwestycji w B&R w Polsce"
  65. Nowe mikrofalowe reaktory do syntez nanocząstek - wybrane zagadnienia badawcze i przykłady zastosowań
  66. ZrO2:Tb nanopowders obtained by coprecipitation method
  67. ZnFe2O4/ZnO core-shell particles obtained by coprecipitation route
  68. Looking at the real structure of nanocrystals with powder diffraction: the apparent lattice parameter approach
  69. Hydrothermal Synthesis of ZnAl2O4 Spinel
  70. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  71. Looking beyond limitations of diffraction methods of structural analysis of nanocrystalline materials
  72. Nanostructural characterization and magnetic properties of pure and Fe, Co or Mn-doped TiO2 nanopowders prepared by Solar Physical Vapor Deposition (SPVD)
  73. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
  74. Novel synthesis methods of Co-doped ZnO Nanopowders
  75. Excitation transfer in zirconia nanocrystals and ceramics
  76. Eu Luminescence in zirconia nanocrystals
  77. ZnO ceramic sintering and luminescence properties
  78. X-ray and electron microscopy techniques studies on nanocrystalline MgO powder materials prepared by sol-gel method
  79. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
  80. Strategia rozwoju badań nanoproszków
  81. Statystyczna analiza deklarowanych kierunków rozwoju nowoczesnych materiałów w projekcie FOREMAT w powiązaniu z tematami polskich prac doktorskich, habilitacyjnych i grantów KBN
  82. Error bars in powder diffraction
  83. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
  84. Characterization of nanopowders
  85. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
  86. Synthesis of nanopowders in supercritical water in a continuous flow reactor
  87. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
  88. High pressure-low temperature synthesis of new nanostructured compounds  
  89. Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders"
  90. Doped zirconia nanopowders made in microwave – pressure reactor
  91. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO2 nanopowders doped with a range of metal ions
  92. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
  93. Microstructural analysis of ZnO powders with different concentrations of Al dopant obtained by means of hydrothermal synthesis
  94. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
  95. Fast luminescence in ZnO structures
  96. Structure of nanocrystalline powders of MgO prepared by sol-gel method
  97. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
  98. Luminescence properties of cerium doped Y3Al5O12 nanopowders and nanoceramic
  99. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
  100. Mapping dopants effects in the High pressure synthesis of nanostructured zinc oxide
  101. High pressure-low temperature synthesis of new nanostructured compounds
  102. Advanced nanostructural zirconia ceramics for optical oxygen sensors
  103. Study of undoped and doped zirconia nanocrystals luminescence
  104. Catalytic growth by molecular beam epitaxy and properties of ZnTe-based semiconductor nanowires
  105. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
  106. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  107. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
  108. Production of doped and non doped ceramics nanoparticles for optical applications
  109. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
  110. Characterization of nanocrystalline ZrO2 doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
  111. Particle Size Distribution of ZrO2:Pr3+- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
  112. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
  113. Structure studies on nanocrystalline MgO powders prepared by sol-gel method dried under different conditions
  114. The luminescence properties of ZnO:Al nanopowders obtained by sol-gel and vaporization-condensation methods
  115. Cathodoluminescence of Al doped ZnO nanopowders
  116. Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods
  117. Luminescence and structural properties of rare-earth doped YAG nanoceramics
  118. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
  119. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  120. Growth and properties of ytterbium doped KY(WO4)2 nanocomposites
  121. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
  122. Hydrothermal synthesis of doped oxide nanomaterials: a review
  123. Synthesis and XRD/PL studies of pure and Sb2O3 doped ZnO nanophases
  124. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
  125. Investigations of phase composition and grain size distribution in Pr doped ZrO2
  126. Dyfraktometryczna analiza mikro- i makro-naprężeń w spiekach i kompozytach otrzymanych pod wysokim ciśnieniem i wysoką temperaturą.
  127. Badania własności termicznych nanokryształów metodami dyfraktometrycznymi
  128. Nasze wyniki, zdania i sposoby ich realizacji
  129. The comparison of the properties of YAG obtained by coprecipitation and SCR method
  130. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
  131. Accuracy of XRD size measurements of nanocrystals
  132. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
  133. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
  134. Preliminary research on zirconia based optical oxygen sensor
  135. Hydrothermal synthesis: opportunities for technology transfer in advanced materials
  136. Preparation and characterisation by XRD and TEM of ZnO based magnetic helionanos
  137. New routes for the synthesis of Al-doped ZnO transparent nanomaterials
  138. Preparation and electrical properties of the BaTiO3 nanoceramics
  139. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
  140. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
  141. Time-resolved luminescence of nanostructured ZnO
  142. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
  143. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
  144. Yttria stabilized zirconia nanocrystals luminescence
  145. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
  146. Optical investigations of RE-doped YAG nanoceramics
  147. Nanocrystalline SiC compacts obtained by sintering of laser synthesized nanopowders under extreme pressures
  148. Electrical properties of nanocrystalline ZrO2 at high-pressure
  149. Production and sintering of diamond particles with nanometric nickel coating
  150. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
  151. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
  152. Sintering of nanopowders under high pressure
  153. Synthesis and properties of GaAs nano-composites
  154. SiC-Zn nanocomposites obtained using high-pressure infiltration technique
  155. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  156. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  157. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
  158. Nanophase Production Using Solar Energy
  159. Hydrothermal synthesis of nanomaterials: bringing materials closer to life
  160. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
  161. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  162. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
  163. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
  164. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  165. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
  166. Biocompatibility of thin films based on hydrothermal synthesized HAp
  167. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
  168. Fabrication and electrical properties of Eu3+:BaTiO3 nanoceramics for SOFC
  169. Ionic Conductivity of 4%mol, 9.5%mol Yttria doped Zirconia Nanomaterials and (YSZ )0.98-(Al2O3)0.02 Nanocomposites
  170. Luminescence of ZrO2 nanocrystals
  171. Molecular impurities in the luminescent ZnO nanocrystals
  172. Nano SiC doped MgB2 bulk superconductor with Tc over 42 K by high gas pressure annealing
  173. HYDROTHERMAL SYNTHESIS OF NANOSTRUCTURED ZIRCONIA MATERIALS: PRESENT STATE AND FUTURE PROSPECTS
  174. Analytical expression for Diffraction Line Profile for polydispersive powders
  175. FW1/5-4/5M method for determination of the Grain Size Distribution from powder diffraction line profile
  176. Dyfrakcyjne badania mikrostruktury polikryształów nanometrowych poddawanych działaniu wysokiego ciśnienia
  177. X-ray diffraction studies of thermal properties of bulk- and surface-atoms of nanocrystalline SiC
  178. Powder precursors for nanoceramics: cleaning and compaction
  179. Examination of the atomic Pair Distribution Function (PDF) of SiC nanocrystals by in-situ high pressure diffraction
  180. Investigation of the microstructure of SiC-Zn nanocomposites by microscopic methods: SEM, AFM and TEM
  181. Sythesis of metal-ceramic nanocomposites by high-pressure infiltration
  182. X-Ray investigations of the natural and artificial White Etching Layer
  183. Diffusion and diffusion induced defects in GaN
  184. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  185. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
  186. Relaxation processes in ZrO2 at high pressures
  187. Luminescence of ZrO2 and ZnO nanocrystals
  188. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
  189. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
  190. Zirconia pressure sensors: from nanopowders to device
  191. New hydroxyapatite based nanomaterials for potential use in medical fields
  192. Correlation between high-pressure ZrO2 electrical properties and crystallite size
  193. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
  194. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
  195. Microstructure of Surface Layers of Raiways After Heavy Exploatation
  196. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
  197. Reaction Diffusion in Metallic Systems under High Pressure
  198. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
  199. X-Ray Characterization of Nanostructured Materials
  200. Generetion and Relaxation of Strain in SiC and GaN under Extreme Pressure
  201. Pressure Effect on Interface Energy, Diffusion and Reactions
  202. Influence of high pressure on the polytype structure of nanocrystalline GaN
  203. Transformation of fractal microstructure of nanocrystalline SiC and diamond in high pressures - Small Angle Scattering Study
  204. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
  205. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
  206. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
  207. Luminescense of Nanosize ZrO2
  208. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
  209. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
  210. Modelling Hydrothermal Synthesis of Ceramic Composite Nanomaterials
  211. Modelling Hydrothermal Synthesis of Ceramic Composite Nanomaterials
  212. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
  213. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
  214. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)

Presentation: Oral at Struktury i modelowanie nanokryształów, by Tomasz Strachowski
See On-line Journal of Struktury i modelowanie nanokryształów

Submitted: 2006-02-27 10:40
Revised:   2009-06-07 00:44