Selected applications of the Zeiss Ultra Plus scanning electron microscope to study bio-materials in the Laboratory of Nanostructures for Photonics and Nanomedicine will be presented.  

• Legal notice:
  

  Copyright (c) Pielaszek Research, all rights reserved.
  The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
  In every case, proper references including Author(s) name(s) and URL of this webpage: https://science24.com/paper/28351 must be provided.

1. Optical oxygen sensor for safe operation in hazardous areas
2.   Optical oxygen sensor for safe operation  in hazardous areas
3. Quo Vadis nanotechnology- for various stakeholders
4. Opening of the Thursday Sessions of NanoPl 2014
5. Microwave reactors for nanoparticle's synthesis
6. Opening of Nano-Bio-Med session
7. Bioactive GoHAP nanoparticles and their applications in medical implants technology
8. Wykorzystanie metody NTA (Nanoparticle Tracking Analysis) w ocenie wielkości krążących mikrocząstek osocza i innych płynów fizjologicznych: pułapki i triki
9. Advanced characterisation of nanomaterials according to ISO 17025 Norm

10. Microwave solvothermal synthesis of resorbable nano-HAp with controlled grain size.
11. Microwave Solvothermal Synthesis of Nano Zinc Oxide Nanoparticles
12. Microwave Solvothermal Technology (MSS) for nanoparticle synthesis
13. Zaawansowana Charakteryzacja Nanocząstek
14. [CEPT] Solvothermal synthesis nano zinc oxide in  microwave reactor MSS2
15. [CEPT] Solvothermal synthesis and characterization of nanomaterials in the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials
16. Scanning Electron Microscopy Investigations and Analysis of Nanostructures
17. Polish Nanotechnology Platform - a discussion group at Linked-In
18. Novel optical oxygen sensor for life and health protection made of nano-zirconia
19. Nanometrology as a tool for nanotechnology problems solving
20. Creating a Polish Nano-Bio-Technology and  Nano-Medicine Platform?
21. MSS synthesis of highly biocompatible nano-HAP and coating of 3D poymer scaffolds
22. Nanotechnologie w gospodarce województwa podlaskiego
23. Characterization of nanomaterials according to EU recommendations, on the example of ZnO nanoparticles
24. [CEPT] Nanohydroxyapatite-polylactide composites  for regenerative implants
25. [CEPT] MSS synthesis of highly biocompatible nano-HAP with properties depending on the synthesis time.
26. [CEPT] Studies of nanoparticles size distribution
27. [CEPT] Studies of solubility of nanoparticles and stability of their suspension
28. Iinvestigation of nanoparticles by DSC-TG methods accompanied by chemical analysis of emitted gas
29. Presentation of the  Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT
30. ZnO nanoparticles effect on integrity of human endothelial cells
31. Importance and trends in nanomedicine according  European Nanomedicine Platform survey
32. Welcome address
33. Otwarcie NanoInfoDay, Powitanie
34. Characteristic of hydroxyapatite dense nanoceramic produced by The High Pressure Consolidation  
35. Wpływ parametrów materiałowo-technicznych na właściwości optycznego czujnika tlenu na bazie nano-ZrO₂
36. Synteza nano-ZnO przy pomocy reaktora Mettler Toledo w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT.
37. Infrastruktura i specjalizacje nanotechnologii w Polsce na podstawie wyników ankiety NANOFORCE
38. Solwotermalna synteza domieszkowanego nanotlenku cynku dla projektu NanoFATE. Otrzymywanie wodnych nanozawiesin domieszkowanego tlenku cynku.
39. Nanotechnologia bezpieczna dla ludzi i przyjazna środowisku
40. Badania rozkładu wielkości cząstek i potencjału zeta w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
41. Badanie stabilności i rozpuszczalności zawiesin z nano ZnO i nano ZnO:Co otrzymanych w  Laboratorium Nanostrutur dla Fotoniki i Nanomedycyny CePT
42. Badania nanoproszków przy pomocy technik DSC-TG/ QMS-FTIR w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
43. Synthesis of highly biocompatible hydroxyapatite nanopowders
44. Nanosafety - challenge of nowadays
45. Influence of heat treatment on luminescence of ZrO₂ + Eu nanopowders
46. Solvothermal synthesis of doped nano zinc oxide for the project NanoFATE.
47. Podsumowanie
48. Solwotermalna synteza domieszkowanego nano tlenku cynku dla projektu NanoFATE.
49. Hydrothermal Synthesis of Zinc Oxide Nanopowders
50. Optyczny sensor tlenu na bazie nanokrystalicznego ZrO₂
51. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
52. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
53. Procedury charakteryzacji nanoproszków
54. Oferty nanoproszków - Laboratorium Nanostruktur, Instytut Wysokich Ciśnien PAN
55. Nanofotonika dla małych i średnich przedsiębiorstw - mapy dorogowe i analizy SWOT  najważniejszych technologii.
56. Otwarcie konferencji
57. Polska  Platforma Nanotechnologii i zarys strategicznego programu "Nanotechnologia i wzrost inwestycji w B&R w Polsce"
58. Nowe mikrofalowe reaktory do syntez nanocząstek - wybrane zagadnienia badawcze i przykłady zastosowań
59. ZrO₂:Tb nanopowders obtained by coprecipitation method
60. ZnFe₂O₄/ZnO core-shell particles obtained by coprecipitation route
61. Hydrothermal Synthesis of ZnAl₂O₄ Spinel
62. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO₂ - EXAFS study
63. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
64. Excitation transfer in zirconia nanocrystals and ceramics
65. Eu Luminescence in zirconia nanocrystals
66. ZnO ceramic sintering and luminescence properties
67. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
68. Strategia rozwoju badań nanoproszków
69. Error bars in powder diffraction
70. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
71. Characterization of nanopowders
72. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
73. Synthesis of nanopowders in supercritical water in a continuous flow reactor
74. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
75. Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders"
76. Doped zirconia nanopowders made in microwave – pressure reactor
77. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO₂ nanopowders doped with a range of metal ions
78. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
79. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
80. Fast luminescence in ZnO structures
81. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
82. Luminescence properties of cerium doped Y₃Al₅O₁₂ nanopowders and nanoceramic
83. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
84. Advanced nanostructural zirconia ceramics for optical oxygen sensors
85. Study of undoped and doped zirconia nanocrystals luminescence
86. Catalytic growth by molecular beam epitaxy and properties of ZnTe-based semiconductor nanowires
87. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
88. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO₂ - EXAFS study
89. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
90. Production of doped and non doped ceramics nanoparticles for optical applications
91. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
92. Characterization of nanocrystalline ZrO₂ doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
93. Particle Size Distribution of ZrO₂:Pr³⁺- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
94. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
95. Cathodoluminescence of Al doped ZnO nanopowders
96. Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods
97. Luminescence and structural properties of rare-earth doped YAG nanoceramics
98. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
99. The influence of ZrO₂ containing 10% Eu ³⁺ on the polyurethane hard domain structure of nano-composites with luminescence properties
100. Growth and properties of ytterbium doped KY(WO₄)₂ nanocomposites
101. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
102. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
103. Investigations of phase composition and grain size distribution in Pr doped ZrO2
104. Nasze wyniki, zdania i sposoby ich realizacji
105. Morphology of Al doped zinc oxide obtained by the vapour condensation method
106. The comparison of the properties of YAG obtained by coprecipitation and SCR method
107. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
108. Accuracy of XRD size measurements of nanocrystals
109. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
110. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
111. Preliminary research on zirconia based optical oxygen sensor
112. Preparation and electrical properties of the BaTiO3 nanoceramics
113. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
114. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
115. Time-resolved luminescence of nanostructured ZnO
116. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
117. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
118. Yttria stabilized zirconia nanocrystals luminescence
119. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
120. Optical investigations of RE-doped YAG nanoceramics
121. Electrical properties of nanocrystalline ZrO2 at high-pressure
122. Production and sintering of diamond particles with nanometric nickel coating
123. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
124. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
125. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
126. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
127. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
128. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
129. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
130. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
131. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
132. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
133. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
134. Biocompatibility of thin films based on hydrothermal synthesized HAp
135. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
136. Fabrication and electrical properties of Eu³⁺:BaTiO₃ nanoceramics for SOFC
137. Luminescence of ZrO₂ nanocrystals
138. Molecular impurities in the luminescent ZnO nanocrystals
139. Nano SiC doped MgB₂ bulk superconductor with Tc over 42 K by high gas pressure annealing
140. Investigation of the microstructure of SiC-Zn nanocomposites by microscopic methods: SEM, AFM and TEM
141. X-Ray investigations of the natural and artificial White Etching Layer
142. Diffusion and diffusion induced defects in GaN
143. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
144. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
145. Relaxation processes in ZrO2 at high pressures
146. Luminescence of ZrO2 and ZnO nanocrystals
147. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
148. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
149. New hydroxyapatite based nanomaterials for potential use in medical fields
150. Correlation between high-pressure ZrO2 electrical properties and crystallite size
151. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
152. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
153. Microstructure of Surface Layers of Raiways After Heavy Exploatation
154. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
155. Reaction Diffusion in Metallic Systems under High Pressure
156. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
157. Pressure Effect on Interface Energy, Diffusion and Reactions
158. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
159. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
160. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
161. Luminescense of Nanosize ZrO2
162. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
163. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
164. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
165. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
166. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)