E-MRS Fall Meeting 2009

 on-line journal

Presenting person
I-1 Claudia Bergemann Development of a three dimensional in vitro model system for nondestructive investigation of osteoblast cell growth in scaffolds   
I-2 Jerzy Chmiela Quantification of the inhomogeneity of structure distribution of multiphase materials based on the concept of directional lacunarity
I-3 Mykola V. Isaiev Photoacoustic Transformation in Inhomogeneous Structures: Pulse Mode of Laser Irradiation
I-4 Andriy Kolosyuk Role of phonons on radiation defects formation in silicon and germanium
I-5 Tetyana V. Laptyeva Amplification of evanescent acoustic waves by the layer of 2D magnetic composite
I-6 Miron V. Luchka Role of the structural factors in shaping of mechanical properties of galvanic composite coatings
I-8 Dorota Riegert Characteristic of surface topography of ancient pottery
I-9 Mirosław Salamończyk Fluorescent liquid crystals
I-10 Igor V. Shishkovsky Synthesis of functional graded structures and 3D parts on their base from nitinol and titanium powders by the SLS method.
I-11 Igor A. Sosnovsky Kinetics of the melting front movement in process of centrifugal induction surfacing of powder material
I-12 Liudmyla S. Volkovynska Investigation of an optical near field along the fiber needle’s surface
I-13 Cristina Bogatu Electrochemical deposition of advanced materials based on SnO2 using polymeric additives
I-14 María T. Colomer Colloidal processing of alumina-monazite composites
I-15 Agata K. Dudek Electrochemical corrosion properties of hydroxyapatite composite
I-16 Viktor Filipenkov Composite materials made on the basis of hydroxyapatite for bone tissue replacement
I-17 Alexandre F. Jorge Filled aluminum foam for impact applications
I-18 Volodymyr L. Karbivskyy Adsorption properties of nano-size hydroxylapatite particles
I-19 Krzysztof Kasprzyk Vitrification of lignite fly ash LFA from Polish power plants
I-20 Bogdan Kovalyuk Laser-stimulated thermoelectronic emission from aluminum with nanotubes
I-21 Sergij M. Lakiza Phase diagram for the Al2O3–HfO2–Y2O3 system
I-22 Hsin-Yi Lee Structural characteristics of BiFeO3/LaNiO3 artificial superlattices prepared by rf magnetron sputtering
I-23 Ganna Levchenko Preparation of earth rare diborides and their some properties
I-24 Carlos A. Martínez Preparation and сharacterization of porous Poly-DL-Lactide/Chitosan Composites
I-25 Vladimir V. Pankov Structure and Magnetic Properties of Mn–Zn-Ferrites
I-26 Svitlana E. Polovets Forming of the structure and properties of composite material system LaB6-(Ti,Zr)B2
I-27 Tetiana Sydorenko Brazing perovskite ceramics in pure oxygen atmosphere
I-28 Tatyana M. Ulyanova Influence of impact pressure on a structure and properties of AL2O3-ZrO2 nanostructured powders in the process of ceramic production
I-29 Nastassia Hloba Thermal imidization of polyimide compositions
I-30 Magdalena Jurczyk-Kowalska Fire retardant polyurethane elastomers/aluminophosphorate nanocomposites for higher temperature application
I-31 Dmitry L. Starokadomsky Influence of silicas and microfillers from recycling materials on strength of epoxypolymer
I-32 Marya Tsebrenko Polypropylene microfibers with filler in nanostate
I-33 Elena Zhdanuk Thermal imidization of polyimide compositions
I-34 Maksym Barabash Cast eutectic (b-NiAl+g-Re) alloys for works in high temperature conditions
I-35 Dmytro Brodnikovskyi The structure research of sintered in vacuum Ti-5.4Si after which was obtained by sputtering
I-36 Aglaia D. Georgaka Study of the the sorption of Cu(II) species on the "TiO2 / KNO3" interface.
I-37 Marta Gostomska The structure and properties of Ni-P/CNTs composite layers produced by chemical method
I-38 Chien-Chang Juan A novel light high-entropy alloy Al20Be20Fe10Si15Ti35
I-39 Nataliia Konig Oxidation of inorganic graphene-like tungsten disulfide nanoparticles
I-40 Karolina A. Madrak Functionalized cobalt nanoparticles
I-41 Krzysztof Naplocha Structure and properties of porous preforms made of Saffil fibres for the strengthening of  metal alloys
I-42 Chi Chung Ng Selective laser sintering of magnesium powders for fabrication of porous structures
I-43 Sebastian M. Stach Application of a three-dimensional minimum spanning tree for reconstructing the crack pathway on fractures of WC-Co sintered carbides
I-44 Sebastian M. Stach Taking advantage of the percolation phenomenon for simulating the crack process of brittle materials based on the example of sialon ceramics
I-45 Mikhail D. Starostenkov The Research of the Dynamic Displacements of Atoms at the Introduction of Interstitial Atoms in Ni3Al Intermetallide Containing Symmetric Tilt Grain Boundaries
I-46 Michał Szota Structural and magnetic properties of multilayer system ferromagnetic/metallic separator/ferromagnetic
I-47 Edward Wajs Wear resistance composite electrolitic coating on base nikels
I-48 Renata K. Włodarczyk Sintered materials for bipolar plates
I-49 Jun Hyun Han Copper plating on carbon nanotube for manufacturing aluminum matrix composites
I-50 Cezariusz Jastrzebski Raman spectroscopy studies of metal - carbon nanotubes composite materials.
I-51 Jarosław Judek Laser radiation-induced effects in Raman spectra of multiwalled carbon nanotubes
I-52 Iryna Gornaya New Ti-Si-X eutectic composites: structure and mechanical properties
I-53 Luis F. Novo Composites PLLA/MWNTs produced by twin-screw microcompounder
I-54 Marta E. Płońska-Brzezińska Carbon nano-onion composites
I-55 Munizer G. Purica Micro-Raman analysis of single-wall carbon nanotubes grown by chemical vapor deposition
I-56 Lev Kocherga Effects of the fiber/matrix interface on the fracture of Сf - SiC ceramic matrix composite
I-57 Kateryna Vyshnyakova Carbonaceous particles of onion structures for polymer matrix composites modification
I-58 Valeriy Avetisyan X-ray analysis of thin nanocomposite layers Si(Ti)CN and their mechanical properties
I-61 Alexandr Burya Development and investigation of nanocomposites based on aromatic polyamide
I-62 Anna W. Danelska Deflocculation of nanozirconia powders
I-63 Antonela Dima Electrooptic effect studies  in nano-silicon doped silica sol-gel thin films
I-64 Lucia I. Dumitrescu Ecological nanocomposites based on acrylic copolymers and TiO2 nanoparticles
I-65 Marek Nowak Mg-based nanocomposites for room temperature hydrogen storage
I-66 Dmytro Sydorov Novel hybrid nanocomposite heterostructures based on ZnO and poly-3-methylthiopen for photovoltaic devices
I-67 Oleg Yeshchenko Surface enhanced size-dependent photoluminescence from silver nanoparticles in silica matrix
I-68 Oleg Yeshchenko Influence of interparticle interaction on melting of gold nanoparticles in Au/PTFE nanocomposites
I-69 Ewelina A. Zawadzak Properties of transparent elastomer nanocomposites (polyurethane/ ZrO2:Eu3+) as materials for optoelectronic application
I-70 Iegor Brodnikovskyi Influence of microstructure of NiO-ZrO2 anode composite on its catalytic activity and mechanical behaviour
I-71 Anatoly Lisenko Computer modeling of nanocables structure like SiC@BN
I-72 Vitaly Petrovsky Electrical response on microstructure evolution  of multicomponent CMM
I-73 Leon Vyshniakov Tailoring the structure and functional properties of composites through reinforcing them with knitted metal meshes
I-74 Nicolay Siman Electronic parameters and thermodynamic properties of phases in the Mn-Ni-B system
© 1998-2024 pielaszek research, all rights reserved Powered by the Conference Engine