E-MRS Fall Meeting 2004
on-line journal
Lectures
Symposium A
Symposium B
Symposium C
Symposium D
Symposium E
Symposium F
Symposium G
Symposium H
Symposium I
Joint Workshop G and I
Funding Workshop
Plenary session
Posters
Plenary session
Symposium A
Symposium B
Symposium C
Symposium D
Symposium E
Symposium F
Symposium G
Symposium H
Symposium I
Funding Workshop
Joint Workshop G and I
Timetable
Symposium A
Symposium B
Symposium C
Symposium D
Symposium E
Symposium F
Symposium G
Symposium H
Symposium I
Joint Workshop G and I
Funding Workshop
Plenary session
City map
Downloads
Addendum to Book of Abstracts
Book of Abstracts
Statistics
Participants
Countries
Institutions
Symposia attendance
Presentations per country
No.
Presenting person
Title
I-01
Bogusława Adamczyk-Cieślak
Microstructure evaluation in an Al-Li alloy processed by severe plastic deformation
I-02
Anna Antolak-Dudka
Phase transformations during mechanical alloying of nickel aluminides and subsequent heating of milling product
I-03
Jolanta Baranowska
Microstructural changes in upper surface of austenitic steel under low energy plasma
I-04
Anna Biedunkiewicz
Structural characterization of TiC/C and TiN/C films prepared by sol-gel method
I-05
Anna Biedunkiewicz
The XRD study of the nanostructured TiC/C and TiN/C composites.
I-06
Grzegorz Dercz
Microstructure of Ni(Cr)-Cr_3C_2 -Cr_7C_3 -TiC composite powder
I-07
Anna Drużycka-Wiencek
Annealing temperature effect on residual stresses in 316L steel subjected to HPT process
I-08
Borys M. Efros
Formation of BCC martensite in the stable FCC materials under severe plastic deformation
I-09
Borys M. Efros
Surface nanostructures and tribological properties of metallic materials
I-10
Borys M. Efros
Structure and properties of ultrafine grained nickel after packet hydroextrusion
I-11
Lukasz Kaczmarek
NANOCRYSTALLINE Gamma TiAl BASED MICROALLOYED COATINGS AS GAS CORROSION BARRIERS
I-12
Małgorzata Karolus
X-ray studies of nanocrystallisation in Fe-Nb-B amorphous alloys
I-13
Dominika Klassek
The influence of twin bands density on microstructure of 316LVM austenitic stainless steel subjected to transverse rolling
I-14
Bogdan Kovalyuk
The phase conversion in stainless steel under LSW processing
I-15
Mariusz Kulczyk
Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
I-16
Krzysztof J. Kurzydlowski
Effect of sever plastic deformation method on microstrucure and mechanical properties of Al and Cu
I-17
Jerzy Latuch
Dependence of microhardness on annealing time of amorphous Al-Mm-Ni-(Fe,Co) alloys
I-18
Malgorzata Lewandowska
EFFECT OF INITIAL MICROSTRUCTURE ON MECHANICAL PROPERTIES OF THE Al-Cu-Mg-Mn ALLOY PROCESSED BY HYDROSTATIC EXTRUSION
I-19
Monika Mirkowska
STAGES OF THE LAYER GROWTH DURING THE IMPULSE PLASMA DEPOSITION METHOD.
I-20
Dariusz Oleszak
Phase transformations in M2 steel powders subjected to ball milling
I-21
Jong Bae Park
Synthesis of a Silver nanowire with Anodic Aluminum Oxide Template
I-22
Marcin Sęk
Preparation and characterization of nanocrystalline copper layers
I-23
Malgorzata Sus-Ryszkowska
THE INFLUENCE OF HIGH-ANGLE BOUNDARIES ON THE MECHANICAL PROPERTIES OF NANO-CRYSTALLINE IRON OBTAINED BY SEVERE PLASTIC DEFORMATION
I-24
Robert Szczesny
Studies of CVD Nanometallic Layers Prepared from Cu and Ag Carboxylates
I-25
Agnieszka Szymanska
Phase transformations in ball milled AISI 316L stainless steel powder and in the steel after sintering
I-26
Florence Turquier
Pressure-assisted synthesis of nanostructured Al-Cu-Fe quasicrystals
I-27
Emil Wierzbiński
Surface condensation of material during IPD
I-28
Michal J. Wozniak
Nanoindentation measurements of austeno-ferritic stainless steel submitted to hydrogen charging.
I-29
Iwona Kucharewicz
Studies of the initial stage of the carburisation of nanocrystalline iron with methane
I-30
Iwona Kucharewicz
KINETICS OF CARBON DEPOSIT FORMATION FROM DECOMPOSITION OF METHANE ON NANOCRYSTALLNE IRON SURFACE
I-31
Madalina L. Popescu
Biocompatibility of thin films based on hydrothermal synthesized HAp
I-32
Yuri Suchorski
Evolution of VPO and VO_x catalysts under conventional XPS conditions: the role of support effects
I-33
Rafal Wrobel
The kinetics of the nanocrystalline iron nitrides reduction
I-35
Albina A. Nikolaeva
THERMOELECTRIC PROPERTIES OF QUANTUM BI WIRE DOPED WITH SN AT ELECTRON TOPOLOGICAL TRANSITIONS INDUCED BY STRETCH AND DOPING
I-36
Katarzyna Nowakowska-Langier
Magnetic nanostructure of Fe-Ti alloy layers produced by IPD
I-37
Anna Gajewska - Midziałek
Investigations of the wear resistance of nanocrystalline composite coatings Ni-SiC
I-38
Tomasz Bodziony
Magnetic resonance study of PTMO - block - PET copolymer filled with a mixture of Fe_3O_4 and Fe_3C nanoparticles at low concentration
I-39
Ivan P. Dotsenko
New nanocomposite materials with unique property combination
I-40
Vladimir S. Yefanov
Anisotropic superparamagnetic resonance of Co nanoparticles in nanoporous carbon
I-41
Vladimir S. Yefanov
Intergranular interaction and ferromagnetic resonance of Ni nanoparticles in nanoporous carbon
I-42
Gleb Yurkov
Magnetic nanoparticles stabilized by organic polymer matrixes
I-43
Halina Garbacz
Nanometals for medical applications
I-44
Janusz Jaglarz
Determination of steel surfaces roughness subjected to etching and oxidation processes
I-45
Janusz Jaglarz
Determination of optical parameters of polyazomethine thin films by reflectance measurements.
I-46
Judita Puišo
INVESTIGATION OF NUCLEATION AND COALESCENCE PROCESS OF METALLIC FILMS (Ag. Cr) ON DIFFERENT SUBSTRATES
I-47
Koichiro Inomata
Critical current density reduction for current-induced magnetization switching
I-48
Pravin P. Deshpande
Electrodeposition of conducting poly( 0 -toludine ) coatings on steel
I-49
S. H. Jeong
Influence of dopants on the physical properties of metal(Al, Ag, Li) doped ZnO Films grown by RF magnetron sputtering
I-50
Yuri Kaganovskii
2D periodic structures and conducting nano-wires fabricated by pulsed laser irradiation of silver and gold island films
I-51
Andrian V. Kuchuk
Diffusion barrier properties of reactively sputtered W-Ti-N thin films
I-53
Marcin Brosławski
Surface diffusion of potassium from iron catalyst
I-54
Bartłomiej Januszewicz
The structure and properties of oxygen hardenend titanium and its alloys
I-55
Petro P. Kostrobii
TIME EVOLUTION MODELLING OF THE SURFACE COVERAGE FOR CATALYTIC SYNTHESIS OF CARBONIC ACID GAS
I-56
Jae Young Park
Structural determination of the low-coverage phase of Al on Si(001) surface
I-57
Natalya V. Shishkova
ExplosiveTreatment Effect on Structure and Properties of (gamma+epsilon) Alloy on the Basis of Fe-Mn-Solid Solution
I-58
Ewa Talik
Characterisation of newly obtained Pb(Mn1/3Nb2/3)O3 ceramics by XRD, XPS and dielectric permittivity tests.
I-59
Ewa Talik
Electronic structure of AgNbO_3 single crystals
I-60
Motonori Tamura
Permiability of Deuterium in TiN films
I-61
Marius Volmer
MAGNETORESISTANCE AND HALL EFFECT CHARACTERISATION OF SOME MAGNETIC MULTILAYER STRUCTURES
I-62
Sylwia Wrotek
Structure and electrical properties of the film CoFeZr-aluminium oxide nanocomposites
I-64
Felicia Vasut
Study about burning of hydrogen isotopes on metallic catalyst in detritiation pilot plant for CANDU reactors
I-65
Igor Penyak
"CO oxidation on thin Pt crystals : stoichiometric and mathematical models."
I-66
Elerlanj P. Sinjavsky
Conductivity in quantum wires in a homogeneous magnetic field
I-67
Michał Maryniak
Electrical conductivity of TiC and (Ti,W)C ceramic samples
© 1998-2024
pielaszek research
, all rights reserved
Powered by the
Conference Engine