E-MRS Fall Meeting 2006

 on-line journal

Presenting person
D1 Agnieszka Abramowicz PVC/MMT nanocomposites prepared in-situ
D2 Anna Boczkowska Synthesis, microstructure and properties of urea-urethane hybrid nanocomposites
D3 Leszek Jakuczek Siloxane microgel nanoparticles, grafted with polystyrene- as modifying agents for block copolymers
D4 Lucjan Jerzykiewicz Formation of bimetallic oxide nanoparticles from alkoxide precursors.
D5 Łukasz John Synthetic strategy to access organometallic precursors for oxide-ceramic materials
D6 Bogusław Major Laser ablation by MAPLE at cryogenic conditions to deposition of biodegradable polymer
D7 Paula N. Obreja Polymers doped with metal oxide nanoparticles with controlled refractive index
D8 Agnieszka Pilaszkiewicz Elastomeric nanocomposites with bioactive and nanocrystalline TiO2
D9 Elisabete R. Silva Processing of cordierite foams by direct foaming
D10 Barbara Górnicka Varnises for use in electrical insulation modified with nanoparticles
D11 Mariusz Oleksy Modified bentonites as thixotropic fillers
D12 Magdalena Jurczyk-Kowalska An influence of boehmite modification on the dispersion in the polyurethane matrix
D13 Urve Kallavus Pretreatment of cellulose matrix for the generation of one-dimensional nanostructures
D14 Anna Kosmalska The influence of dispersing agents on the morphology and properties of synthesized nanoparticles of silica
D15 Ian E. O Connor New Method For The Purification Of Carbon Nanotubes and Preparation Of Polymer-Nanotube Composites
D16 Andrzej Nowicki Modification of Bentonite Fillers Using Ionizing Radiation
D17 Oscar F. Olea Mejia Thermoplastic polyurethane elastomer reinforced with fumed silica nanoparticles: effects on thermal, mechanical and tribological properties
D18 Leszek Pysklo Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
D19 Jerzy Sanetra Study on photovoltaic devices based on polymer and SiC nanoparticles
D20 Joanna E. Siejka - Kulczyk The influence of nano - filler on microstructure homogeneity and selected properties of dental ceramic - polymer composites
D21 Marcin Soboń FMR study of carbon coated cobalt nanoparticles dispersed in paraffin
D22 Piotr S. Wojciechowski Organic-Inorganic Hybrids in the Nanotechnology of Inorganic Particles
D23 Rolf Zehbe Anodic 2D and 3D Immobilization of Nano-sized Alumina Particles in a Fibrin Network
D24 Janusz Jaglarz Characterization of Polyazomethine thin films by optical measurements
D25 Dorota Pietkiewicz Characterization of polyether-block-amide thermoplastic elastomer containing fumed silica nanoparticles
D26 Joanna Ryszkowska Applications of quantitative image analysis to the description of the morphology of polyurethane/carbon nanotubes composites
D27 Ewelina A. Zawadzak Structure and properties of polyurethane/YAG:Tb3+ nano-composites with luminescence properties
D28 Magdalena Kwiatkowska Structure and physical properties of TiC nano- and microparticle filled polyester and polyurethane
D29 Monika J. Malesa Properties of SBR, NBR and EPDM vulcanizates reinforced by layered silicates.
D30 Nelly Zakarina Synthesis and catalytic activity of nanosized platinium catalyst stabilized by polyvinilpirrolidone
D31 Bartłomiej J. Waśniewski Structure and thermal properties of epoxy resins nano-composites with flame retardants
D32 Umar Khan The effect of solvent choice on the mechanical and morphological properties of carbon nanotube-polymer composites.
D33 Czesław Ślusarczyk Studies on the crystalline phase of iPP/organo-modified montmorillonite composite fibers
© 1998-2024 pielaszek research, all rights reserved Powered by the Conference Engine