prof Krzysztof J. Kurzydlowski

e-mail:
phone:
fax:
web:
interest(s):

Affiliation:

Warsaw University of Technology, Faculty of Materials Science and Engineering

address: Wołoska 141, Warszawa, 02-507, Poland
phone: (+48-22)6608529
fax: (+48-22)6608514
web: http://www.inmat.pw.edu.pl

Participant:

High Pressure School 1999 (3rd)

began: 1999-09-13
ended: 1999-09-17
Presented:

Participant:

E-MRS Fall Meeting 2002

began: 2002-09-15
ended: 2002-09-19
Presented:

Participant:

E-MRS Fall Meeting 2003

began: 2003-09-15
ended: 2003-09-11
Presented:
E-MRS Fall Meeting 2003
Professor CZOCHRALSKI - Distinguished Scientist and Inventor, Founder of the Modern Materials Science
E-MRS Fall Meeting 2003
Bulk and Graded Materials

Participant:

E-MRS Fall Meeting 2006

began: 2006-09-04
ended: 2006-09-08
Presented:

Participant:

E-MRS Fall Meeting 2007

began: 2007-09-17
ended: 2007-11-30
Presented:

Participant:

E-MRS Fall Meeting 2008

began: 2008-09-15
ended: 2008-09-19
Presented:

Participant:

E-MRS Fall Meeting 2009

began: 2010-09-14
ended: 2010-09-18
Presented:

Publications:
  1. Ab-initio calculations of elastic properties Ni3Al and TiAl under pressure
  2. A combination of microCT and FEM methods for development of a new scaffold for bone regeneration
  3. Al2O3-Fe functionally graded materials fabricated under magnetic field
  4. An influence of boehmite modification on the dispersion in the polyurethane matrix
  5. Annealing temperature effect on residual stresses in 316L steel subjected to HPT process
  6. Atomic-scale Ab-initio computations of the B2-RuAl
  7. Biodegradable and bioabsorbable polymeric - ceramic composites for medical applications
  8. Bone tissue engineered product based on human bone derived cells and polyurethane scaffold
  9. Bulk and Graded Materials
  10. Bulk  nanostructured  titanium  fabricated  by  hydrostatic  extrusion
  11. Characterization of nanopowders
  12. Characterization of the effects of hydrostatic extrusion on structure and surface properties of 303 austenitic stainless steel
  13. Composites PLLA/MWNTs produced by twin-screw microcompounder
  14. Corrosion resistance of nanostructured titanium
  15. Culture of osteoblasts on nanostructured titanium – preliminary observation
  16. Ductility of Nanocrystalline Materials Processed by Severe Plastic Deformation
  17. Effect of deformation and strain rate on diminishing of microstructure of aluminium alloys (AlCu4Zr0.5 and AlZn6Mg3CuZr)
  18. Effect of grain size on reactive diffusion between Ti-Al
  19. EFFECT OF INITIAL MICROSTRUCTURE ON MECHANICAL PROPERTIES OF THE Al-Cu-Mg-Mn ALLOY PROCESSED BY HYDROSTATIC EXTRUSION
  20. Effect of Non-conventional Large Deformations on Microstructure and Properties of Metals
  21. Effect of sever plastic deformation method on microstrucure and mechanical properties of Al and Cu
  22. Effect of surface treatment on the microstructure of TA6V
  23. Electron microscopy studies of magnesium hydride
  24. Electrospun polymeric fibers for cartilage regeneration
  25. Evaluation of crystal structure and polytypism of SiC in microwave sintered diamond-SiC composite by TEM and HR-TEM
  26. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  27. Fabricationg polyurethane/calcium carbonate composite scaffold for bone tissue engineering
  28. FINITE ELEMENT MODELLING OF THE RESIDUAL STRESSES IN THE CERAMIC-ELASTOMER COMPOSITES
  29. Fire retardant polyurethane elastomers/aluminophosphorate nanocomposites for higher temperature application
  30. Formation of ultrafine gradient structure in hard magnetic alloy Fe-30%Cr-8%Co
  31. Grain Boundary Migration in Nanocrystalline Iron
  32. Grain refinement in CuCrZr by SPD processing
  33. Hybrid functional applied to the study of properties of narrow and wide band gap semiconductors
  34. Hydrogen induced changes in 316L stainless steel microstructure
  35. Hydrostatic extrusion and nanostructure formation in an aluminium alloy
  36. Influence of hydrostatic extrusion parameters on the microstructure and mechanical properties of 6082 aluminium alloy
  37. Investigation of aqueous surface processes and corrosion mechanisms of Al-(Cu)-Fe-Cr quasicrystaline approximant
  38. Investigation of cells interactions with textile scaffolds for bone tissue enginnering
  39. Investigation of fatique crack growth rate of Al 5484 ultrafine grained alloy after ECAP process
  40. Investigation of the DLC and novel DLC-polymer hybrid coatings using FIB and SEM techniques
  41. IN VIVO WEAR OF POLYETHYELNE GLENOID COMPONENTS IN TOTAL SHOULDER ARTHROPLASTY
  42. Materials hardness estimation by simulation of the indentation process
  43. Materials Research in Poland
  44. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  45. Mechanical properties nanostructured iron obtained by different methods of Severe Plastic Deformation
  46. Microscopic and surface analytical characterization of TiO2 nanotubes produced by anodic oxidation and thermal treatment 
  47. Micro Sensor for cell force measurement
  48. Microstructural and mechanical characterization of zirconia based composite
  49. Microstructure and mechanical properties of 7475 aluminium alloy processed by SPD methods
  50. Microstructure and mechanical properties of binary Al-Li alloys processed by ECAP
  51. Microstructure and mechanical properties of HE-treated titanium depending on its initial state
  52. Microstructure evaluation in an Al-Li alloy processed by severe plastic deformation
  53. Microstructure of Ni-P thin layers obtained by a chemical method
  54. Microstructure of the ceramic - polymer composites for dental applications
  55. Modeling of order-disorder phase transition in intermetallic compounds
  56. Modelling of plastic deformation of nano-polycrystalline materials
  57. Modelling of the Influence of the Grain Size Distribution on the Grain Growth in Nanocrystals
  58. Modelling the influence of the grain size distribution on the properties of nanometals
  59. Modelling the interaction of crack tip with nanostructure, which creating by deformation.
  60. Molecular statics simulation of nanoindentation on nanocrystalline copper
  61. Morphological and surface analytical characterization of chemically pretreated Ti surfaces intended for biomedical applications
  62. Morphology and chemical characterization of Ti surfaces modified for biomedical applications
  63. Morphology and properties of oxide films formed on the nanocrystalline 316L austenite steel
  64. Nanomaterials in dental applications
  65. Nanometals for medical applications
  66. Nanostructure formation in austenitic stainless steel
  67. Non-elastic behaviours of high-porosity ceramics and ceramic-polymer composites
  68. Optimization of polyurethane structure as the potential materials for bone tissue engineering applications
  69. Optimization of the polymeric scaffolds for bone tissue engineering fabricated by rapid prototyping method

  70. A hybrid atomistic-continuum finite element modelling of locally disordered crystalline structure

  71. Applications of quantitative image analysis to the description of the morphology of hybrid polyurea-nitryle-urethanes

  72. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.

  73. Evaluation of degradation degree of dental hybrid composite used as permanent fillings

  74. Fabrication and micro-structure characterization of Al2O3/Ni-P composites with interpenetrating phases

  75. Hydrostatic extrusion of intermetallic Ti-Al layers

  76. Improvement of wetting and bonding of SiO2 ceramics and urea-urethane elastomer

  77. Influence of severe plastic deformation on PLC effect in Al 5XXX alloy

  78. PLASTIC PROPERTIES OF GaN AND Al_2O_3 CRYSTAL: FEM-SIMULATION OF NANOINDENTATION CONFIRMED BY HIGH-RESOLUTION MICROSCOPY

  79. Mechanical properties and deformation behaviour of ultra-fine grained nickel.

  80. Mechanical properties of aluminium processed by equal channel angular pressing

  81. Microstructural evaluation during particles addition to lead-free solders

  82. Microstructure refinement under high plastic strain rates in hydrostatic extrusion process

  83. Model for intermetallic phase and intermetallic compound solidification during diffusion soldering

  84. NANOCRYSTALLINE Cu-Al2O3 COMPOSITES SINTERED BY THE PULSE PLASMA TECHNIQUE

  85. Polymer matrix composites with nanoparticles of TiC obtained by a sol-gel method
  86. Polyurethane-based material with calcite and aragonite for tissue engineering composite scaffolds
  87. Polyurethane nano-composites with luminescence properties for optics and optoelectronics applications.

  88. Optimization of particle reinforced lead-free solders

  89. PULSE PLASMA SINTERING OF A NANOCRYSTALLINE Cu POWDER

  90. Predicting site occupation of Fe in B2 NiAl from ab initio computations
  91. Preliminary examinations of mechanical properties of DLC and novel DLC-polymer hybrid coatings for resurfacing hip prostheses
  92. Preliminary studies on degradation of polylactides fibers
  93. Professor CZOCHRALSKI - Distinguished Scientist and Inventor, Founder of the Modern Materials Science
  94. Properties of transparent elastomer nanocomposites (polyurethane/ ZrO2:Eu3+) as materials for optoelectronic application

  95. Texture Development in Model Al-Li Alloy Subjected to Severe Plastic Deformation

  96. The influence of hydrostatic extrusion on mechanical properties and tribological characteristics of an austenitic stainless steel

  97. The Influence of hydrostatic extrusion on microstructure of 6082 aluminum alloy

  98. Thermal stability of hybrid polyurethane and modified boehmite

  99. The role of the weak points in the corrosion resistance of hydrostatically extruded steel porducts

  100. The size effect in strength and fracture toughness of deformation origin submicro- and nanomaterials.

  101. Quantitative Description of Microstructure of Nano-materials
  102. Recrystallization and Grain Growth in Nano-structured Austenitic Stainless Steel under Electric Current Heating
  103. Reduced activation ODS ferritic steel – recent development in high speed hot extrusion processing
  104. Repair and regeneration of osteochondral defects in the articular joints
  105. SEM investigations of tooth/ filling bonding
  106. SHRINKAGE OF DENTAL POLYMERIC COMPOSITES
  107. Sintering temperature effect on structure and properties of Al2O3/Ni-P composites with interpenetrating phases
  108. Stability of second phase particles during processing by hydrostatic extrusion
  109. Statistical model of grain growth in polycrystalline nanomaterials
  110. Stereology of Nanomaterials
  111. Stochastic Approach To The Changes In The Mechanical Properties Of Nano-Crystalline Materials Induced By Grain Growth
  112. Strain localization in nanocrystalline iron after Severe Plastic Deformation
  113. Structural stability of zirconia ceramic in water and acid solutions
  114. Structural-strength aspects of glass/metallic composite based on Co-Cr-Mo implantation alloy
  115. Structure and properties of polyurethane/YAG:Tb3+ nano-composites with luminescence properties
  116. Structure and thermal properties of epoxy resins nano-composites with flame retardants
  117. Studies of Ni-P Thin Films by Electroles Deposition Method
  118. Surface effect on atomic ordering in nano-layered L10 AB binaries: multiscale Monte Carlo Simulation
  119. Tailoring mechanical properties by grain refinement and particle redistribution
  120. Tailoring mechanical properties of nano-structured Eurofer 97 steel for fusion applications
  121. Targeted Research Project: Metallic, Ceramic and Organic Nanomaterials: Processing - Structure - Properties - Applications
  122. TEM investigations of the nanostructure, multilayer CrN/Cr coatings obtained by vacuum-arc method
  123. The effect of grain size distribution on mechanical properties of nanometals
  124. The Effect of Hydrostatic Extrusion on Resistance of 316 Austenitic Stainless Steel to Pit Nucleation
  125. The Effect of Hydrostatic Extrusion on the Corrosion Stability of Austenitic Stainless Steels
  126. The influence of grain refinement on the corrosion mechanism of 7475 aluminium alloy
  127. THE INFLUENCE OF HIGH-ANGLE BOUNDARIES ON THE MECHANICAL PROPERTIES OF NANO-CRYSTALLINE IRON OBTAINED BY SEVERE PLASTIC DEFORMATION
  128. The influence of nano - filler on microstructure homogeneity and selected properties of dental ceramic - polymer composites
  129. The influence of temperature and pressure on possibility of obtaining Al_2O_3/Ni-P nanocomposite through hot pressing process.
  130. The influence of the structure of metastable τ - phase on magnetic hysteretic properties of Мn55.5Аl44С0.5 alloy
  131. The influence of twin bands density on microstructure of 316LVM austenitic stainless steel subjected to transverse rolling
  132. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  133. Thermal properties of L10-TiAl from first principle calculations
  134. The Structure and Mechanical Properties of Low Carbon Low Alloy Steel Subjected to Severe Plastic Deformation
  135. The Superplasticity of Hard Magnetic Alloy Fe-23wt.%Co-30%Cr with Submicrocrystalline Structure
  136.  A  degradable and highly porous polyurethane scaffolds for bone tissue engineering



Google
 
Web science24.com
© 1998-2010 pielaszek research, all rights reserved Powered by the Conference Engine