Materials Research in Poland

Krzysztof J. Kurzydlowski 

Warsaw University of Technology, Faculty of Materials Science and Engineering (InMat), Wołoska 141, Warszawa 02-507, Poland

Abstract


Materials Research in Poland

K.J.KurzydLowski
Warsaw University of Technology, Deputy Chairman of the State
Committee for Scientific Research, Warsaw University of Technology,
Department of Materials Science and Engineering, 02-504 Warszawa,
Woloska 141, e-mail kjk@inmat.pw.edu.pl

Abstract
Research in materials science in Poland is curried out in a number of
institutes and universities. All research institutions in Poland are
evaluated every four years by the State Committee for Scientific
Research, KBN, which is a major research funding agency in Poland. The
recent evaluation exercise took place at the end of 2001. This
exercise has been carried out separately by 13 sub-committees, each of
them evaluating a specific field of science. The Materials Engineering
and Technology sub-committee reviewed over 40 research organizations
with majority representing research institutes supervised by the
Ministry of Economy. Out of these, 7 were ranked into the first
category - three industrial research institutes, one institute of the
Polish Academy of Sciences and three university departments.

Related papers
  1. Investigation of cells interactions with textile scaffolds for bone tissue enginnering
  2. Culture of osteoblasts on nanostructured titanium – preliminary observation
  3. Electrospun polymeric fibers for cartilage regeneration
  4. Biodegradable and bioabsorbable polymeric - ceramic composites for medical applications
  5. Modelling of plastic deformation of nano-polycrystalline materials
  6. Preliminary examinations of mechanical properties of DLC and novel DLC-polymer hybrid coatings for resurfacing hip prostheses
  7. Optimization of the polymeric scaffolds for bone tissue engineering fabricated by rapid prototyping method
  8. Bone tissue engineered product based on human bone derived cells and polyurethane scaffold
  9. Molecular statics simulation of nanoindentation on nanocrystalline copper
  10. Microstructural and mechanical characterization of zirconia based composite
  11. Modeling of order-disorder phase transition in intermetallic compounds
  12. Optimization of polyurethane structure as the potential materials for bone tissue engineering applications
  13. Fabricationg polyurethane/calcium carbonate composite scaffold for bone tissue engineering
  14. Polyurethane nano-composites with luminescence properties for optics and optoelectronics applications.
  15. Tailoring mechanical properties by grain refinement and particle redistribution
  16. Stochastic Approach To The Changes In The Mechanical Properties Of Nano-Crystalline Materials Induced By Grain Growth
  17. Surface effect on atomic ordering in nano-layered L10 AB binaries: multiscale Monte Carlo Simulation
  18. Characterization of nanopowders
  19. Microstructure and mechanical properties of HE-treated titanium depending on its initial state
  20. Influence of hydrostatic extrusion parameters on the microstructure and mechanical properties of 6082 aluminium alloy
  21. The effect of grain size distribution on mechanical properties of nanometals
  22. Morphological and surface analytical characterization of chemically pretreated Ti surfaces intended for biomedical applications
  23. Electron microscopy studies of magnesium hydride
  24. Microstructure and mechanical properties of 7475 aluminium alloy processed by SPD methods
  25. Investigation of aqueous surface processes and corrosion mechanisms of Al-(Cu)-Fe-Cr quasicrystaline approximant
  26. Characterization of the effects of hydrostatic extrusion on structure and surface properties of 303 austenitic stainless steel
  27. The Effect of Hydrostatic Extrusion on the Corrosion Stability of Austenitic Stainless Steels
  28. The Effect of Hydrostatic Extrusion on Resistance of 316 Austenitic Stainless Steel to Pit Nucleation
  29. Nanomaterials in dental applications
  30. Nanostructure formation in austenitic stainless steel
  31. Evaluation of crystal structure and polytypism of SiC in microwave sintered diamond-SiC composite by TEM and HR-TEM
  32. Hydrogen induced changes in 316L stainless steel microstructure
  33. Statistical model of grain growth in polycrystalline nanomaterials
  34. Repair and regeneration of osteochondral defects in the articular joints
  35. Corrosion resistance of nanostructured titanium
  36. Effect of surface treatment on the microstructure of TA6V
  37. Predicting site occupation of Fe in B2 NiAl from ab initio computations
  38. Structure and properties of polyurethane/YAG:Tb3+ nano-composites with luminescence properties
  39. Structure and thermal properties of epoxy resins nano-composites with flame retardants
  40. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  41. An influence of boehmite modification on the dispersion in the polyurethane matrix
  42. Materials hardness estimation by simulation of the indentation process
  43. Stability of second phase particles during processing by hydrostatic extrusion
  44. The influence of nano - filler on microstructure homogeneity and selected properties of dental ceramic - polymer composites
  45. Grain Boundary Migration in Nanocrystalline Iron
  46. Thermal properties of L10-TiAl from first principle calculations
  47. Structural stability of zirconia ceramic in water and acid solutions
  48. The influence of the structure of metastable τ - phase on magnetic hysteretic properties of Мn55.5Аl44С0.5 alloy
  49. Morphology and chemical characterization of Ti surfaces modified for biomedical applications
  50. Evaluation of degradation degree of dental hybrid composite used as permanent fillings
  51. Optimization of particle reinforced lead-free solders
  52. Microstructural evaluation during particles addition to lead-free solders
  53. Thermal stability of hybrid polyurethane and modified boehmite
  54. Applications of quantitative image analysis to the description of the morphology of hybrid polyurea-nitryle-urethanes
  55. Improvement of wetting and bonding of SiO2 ceramics and urea-urethane elastomer
  56. A hybrid atomistic-continuum finite element modelling of locally disordered crystalline structure
  57. The role of the weak points in the corrosion resistance of hydrostatically extruded steel porducts
  58. The size effect in strength and fracture toughness of deformation origin submicro- and nanomaterials.
  59. The influence of hydrostatic extrusion on mechanical properties and tribological characteristics of an austenitic stainless steel
  60. Fabrication and micro-structure characterization of Al2O3/Ni-P composites with interpenetrating phases
  61. Hydrostatic extrusion of intermetallic Ti-Al layers
  62. PULSE PLASMA SINTERING OF A NANOCRYSTALLINE Cu POWDER
  63. NANOCRYSTALLINE Cu-Al2O3 COMPOSITES SINTERED BY THE PULSE PLASMA TECHNIQUE
  64. Mechanical properties of aluminium processed by equal channel angular pressing
  65. Model for intermetallic phase and intermetallic compound solidification during diffusion soldering
  66. Texture Development in Model Al-Li Alloy Subjected to Severe Plastic Deformation
  67. The Influence of hydrostatic extrusion on microstructure of 6082 aluminum alloy
  68. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  69. Microstructure refinement under high plastic strain rates in hydrostatic extrusion process
  70. Influence of severe plastic deformation on PLC effect in Al 5XXX alloy
  71. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  72. Formation of ultrafine gradient structure in hard magnetic alloy Fe-30%Cr-8%Co
  73. Sintering temperature effect on structure and properties of Al2O3/Ni-P composites with interpenetrating phases
  74. PLASTIC PROPERTIES OF GaN AND Al2O3 CRYSTAL: FEM-SIMULATION OF NANOINDENTATION CONFIRMED BY HIGH-RESOLUTION MICROSCOPY
  75. SEM investigations of tooth/ filling bonding
  76. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  77. Nanometals for medical applications
  78. Effect of sever plastic deformation method on microstrucure and mechanical properties of Al and Cu
  79. The influence of twin bands density on microstructure of 316LVM austenitic stainless steel subjected to transverse rolling
  80. Microstructure evaluation in an Al-Li alloy processed by severe plastic deformation
  81. Polymer matrix composites with nanoparticles of TiC obtained by a sol-gel method
  82. Annealing temperature effect on residual stresses in 316L steel subjected to HPT process
  83. FINITE ELEMENT MODELLING OF THE RESIDUAL STRESSES IN THE CERAMIC-ELASTOMER COMPOSITES
  84. EFFECT OF INITIAL MICROSTRUCTURE ON MECHANICAL PROPERTIES OF THE Al-Cu-Mg-Mn ALLOY PROCESSED BY HYDROSTATIC EXTRUSION
  85. THE INFLUENCE OF HIGH-ANGLE BOUNDARIES ON THE MECHANICAL PROPERTIES OF NANO-CRYSTALLINE IRON OBTAINED BY SEVERE PLASTIC DEFORMATION
  86. Modelling the interaction of crack tip with nanostructure, which creating by deformation.
  87. SHRINKAGE OF DENTAL POLYMERIC COMPOSITES
  88. IN VIVO WEAR OF POLYETHYELNE GLENOID COMPONENTS IN TOTAL SHOULDER ARTHROPLASTY
  89. Atomic-scale Ab-initio computations of the B2-RuAl
  90. Ab-initio calculations of elastic properties Ni3Al and TiAl under pressure
  91. Modelling of the Influence of the Grain Size Distribution on the Grain Growth in Nanocrystals
  92. Ductility of Nanocrystalline Materials Processed by Severe Plastic Deformation
  93. Structural-strength aspects of glass/metallic composite based on Co-Cr-Mo implantation alloy
  94. Microstructure and mechanical properties of binary Al-Li alloys processed by ECAP
  95. Microstructure of the ceramic - polymer composites for dental applications
  96. Effect of Non-conventional Large Deformations on Microstructure and Properties of Metals
  97. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  98. Morphology and properties of oxide films formed on the nanocrystalline 316L austenite steel
  99. Al2O3-Fe functionally graded materials fabricated under magnetic field
  100. Professor CZOCHRALSKI - Distinguished Scientist and Inventor, Founder of the Modern Materials Science
  101. The influence of temperature and pressure on possibility of obtaining Al2O3/Ni-P nanocomposite through hot pressing process.
  102. Mechanical properties nanostructured iron obtained by different methods of Severe Plastic Deformation
  103. Strain localization in nanocrystalline iron after Severe Plastic Deformation
  104. Non-elastic behaviours of high-porosity ceramics and ceramic-polymer composites
  105. The Superplasticity of Hard Magnetic Alloy Fe-23wt.%Co-30%Cr with Submicrocrystalline Structure
  106. Microstructure of Ni-P thin layers obtained by a chemical method
  107. Hydrostatic extrusion and nanostructure formation in an aluminium alloy
  108. Quantitative Description of Microstructure of Nano-materials
  109. The Structure and Mechanical Properties of Low Carbon Low Alloy Steel Subjected to Severe Plastic Deformation
  110. Studies of Ni-P Thin Films by Electroles Deposition Method
  111. Stereology of Nanomaterials
  112. Targeted Research Project: Metallic, Ceramic and Organic Nanomaterials: Processing - Structure - Properties - Applications

Presentation: oral at E-MRS Fall Meeting 2002, by Krzysztof J. Kurzydlowski
See On-line Journal of E-MRS Fall Meeting 2002

Submitted: 2003-02-16 17:33
Revised:   2003-10-21 01:52
Google
 
Web science24.com
© 1998-2008 pielaszek research, all rights reserved Powered by the Conference Engine