Wydział Inżynierii Materiałowej Politechniki Warszawskiej jest jednym z wiodących ośrodków naukowo-badawczych w kraju specjalizującym się m.in. w charakteryzacji struktury nanomateriałów. Zakład Projektowania Materiałów za pomocą wysokiej klasy aparatury będącej wyposażeniem laboratoriów prowadzi szeroką współpracę z małymi i dużymi przedsiębiorstwami jak również z licznymi ośrodkami naukowymi w kraju i za granicą. Tematyka badawcza obejmuje wszelkiego rodzaju materiały metaliczne, ceramiczne, polimerowe jak również kompozyty. Laboratorium mikroskopii elektronowej znajdujące się na Wydziale dysponuje wysokiej klasy skaningowo–transmisyjnym elektronowym mikroskopem wysokorozdzielczym STEM umożliwiającym obserwacje materiałów w skali atomowej (powiększenia do 10000000x). Mikroskop ten umożliwia wykonywanie analizy chemicznej w nanoobszarach dzięki spektrometrom EDS i EELS oraz analizy fazowej. Laboratorium Skaningowej Mikroskopii Elektronowej wyposażone jest również w wiele specjalistycznych urządzeń wykorzystywanych do przygotowywania próbek, przeznaczonych do obserwacji w mikroskopach elektronowych. Jednym z bardziej unikatowych urządzeń jest skaningowy mikroskop jonowy (FIB) którego zastosowanie pozwala na precyzyjne wycięcie cienkich folii i wykonanie badań w interesujących obszarach. Wydział dysponuje również kilkoma elektronowymi mikroskopami skaningowymi (SEM) o napięciu przyśpieszającym 30 kV. Urządzenia te są wykorzystywane do badania morfologii powierzchni ciał stałych w mikro- i nanoskali. Wysoka rozdzielczość i duża głębia ostrości tego typu urządzeń umożliwia prowadzenie badań nanomateriałów nie tylko w postaci litej, ale również pozwala na obserwację np. proszków czy włókien. Nowoczesne urządzenia, obsługiwane przez wysoko wykwalifikowanych operatorów, posiadających wieloletnie doświadczenie w prowadzeniu badań struktury i właściwości nanomateriałów, mogą służyć pomocą przedsiębiorstwom zajmującym się nanotechnologią i nanomateriałami w udoskonalaniu stosowanych technologii.

• Legal notice:
  

  Copyright (c) Pielaszek Research, all rights reserved.
  The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
  In every case, proper references including Author(s) name(s) and URL of this webpage: https://science24.com/paper/23299 must be provided.

1. Financing of industry relevant projects in Poland
2. Experimental evaluation of melting point depression in AlSi/AlN nanomultilayer system
3. The influence of CeO₂ on electrochemical performance of LiMn2O4.
4. Electrospun nanocomposites from PHBV for bone tissue engineering
5. Nanotechnologie w gospodarce województwa podlaskiego
6. Structural and electrochemical studies on LiMn₂O₄ cathode material for LIBs coated with ceramic oxides
7. Modeling of growth kinetics of SiC single crystal in PVT process
8. Application of micro- and nanostructured biomaterials in regenerative medicine
9. Core-shell P(LLA-CL) based electrospun nanofibers for peripheral nerve tissue engineering
10. Surface modification of PCL scaffold changes protein adsorption
11. TiO₂ nanotubes based composite layers for biomedical applications
12. Modification of epoxy resin properties by adding multi wall carbon nanotubes
13. Otwarcie konferencji
14. Perspektywy rozwoju nanomateriałów konstrukcyjnych i funkcjonalnych
15. Zastosowania mikroskopii AFM dla farmacji i medycyny
16. Wykorzystanie nanotechnologii w procesie odlewania precyzyjnego
17. Oczyszczanie i modyfikacja nanomateriałów węglowych
18. Modyfikacje polimerów stosowanych w lotnictwie za pomocą nanorurek węglowych
19. Luminescent polyurethane nanocomposites: processing, structure and properties
20. Micro Sensor for cell force measurement
21. Preliminary studies on degradation of polylactides fibers
22. Effect of grain size on reactive diffusion between Ti-Al
23. TEM investigations of the nanostructure, multilayer CrN/Cr coatings obtained by vacuum-arc method
24. Bulk  nanostructured  titanium  fabricated  by  hydrostatic  extrusion
25. Composites PLLA/MWNTs produced by twin-screw microcompounder
26. Polyurethane-based material with calcite and aragonite for tissue engineering composite scaffolds
27.  A  degradable and highly porous polyurethane scaffolds for bone tissue engineering
28. Reduced activation ODS ferritic steel – recent development in high speed hot extrusion processing
29. Investigation of the DLC and novel DLC-polymer hybrid coatings using FIB and SEM techniques
30. A combination of microCT and FEM methods for development of a new scaffold for bone regeneration
31. Properties of transparent elastomer nanocomposites (polyurethane/ ZrO₂:Eu³⁺) as materials for optoelectronic application
32. Investigation of fatique crack growth rate of Al 5484 ultrafine grained alloy after ECAP process
33. Fire retardant polyurethane elastomers/aluminophosphorate nanocomposites for higher temperature application
34. The influence of grain refinement on the corrosion mechanism of 7475 aluminium alloy
35. Modelling the influence of the grain size distribution on the properties of nanometals
36. Hybrid functional applied to the study of properties of narrow and wide band gap semiconductors
37. Recrystallization and Grain Growth in Nano-structured Austenitic Stainless Steel under Electric Current Heating
38. Effect of deformation and strain rate on diminishing of microstructure of aluminium alloys (AlCu4Zr0.5 and AlZn6Mg3CuZr)
39. Grain refinement in CuCrZr by SPD processing
40. Tailoring mechanical properties of nano-structured Eurofer 97 steel for fusion applications
41. Microscopic and surface analytical characterization of TiO₂ nanotubes produced by anodic oxidation and thermal treatment 
42. Investigation of cells interactions with textile scaffolds for bone tissue enginnering
43. Culture of osteoblasts on nanostructured titanium – preliminary observation
44. Electrospun polymeric fibers for cartilage regeneration
45. Biodegradable and bioabsorbable polymeric - ceramic composites for medical applications
46. Modelling of plastic deformation of nano-polycrystalline materials
47. Preliminary examinations of mechanical properties of DLC and novel DLC-polymer hybrid coatings for resurfacing hip prostheses
48. Optimization of the polymeric scaffolds for bone tissue engineering fabricated by rapid prototyping method
49. Bone tissue engineered product based on human bone derived cells and polyurethane scaffold
50. Molecular statics simulation of nanoindentation on nanocrystalline copper
51. Microstructural and mechanical characterization of zirconia based composite
52. Modeling of order-disorder phase transition in intermetallic compounds
53. Optimization of polyurethane structure as the potential materials for bone tissue engineering applications
54. Fabricationg polyurethane/calcium carbonate composite scaffold for bone tissue engineering
55. Polyurethane nano-composites with luminescence properties for optics and optoelectronics applications.
56. Tailoring mechanical properties by grain refinement and particle redistribution
57. Stochastic Approach To The Changes In The Mechanical Properties Of Nano-Crystalline Materials Induced By Grain Growth
58. Surface effect on atomic ordering in nano-layered L1₀ AB binaries: multiscale Monte Carlo Simulation
59. Characterization of nanopowders
60. Microstructure and mechanical properties of HE-treated titanium depending on its initial state
61. Influence of hydrostatic extrusion parameters on the microstructure and mechanical properties of 6082 aluminium alloy
62. The effect of grain size distribution on mechanical properties of nanometals
63. Morphological and surface analytical characterization of chemically pretreated Ti surfaces intended for biomedical applications
64. Electron microscopy studies of magnesium hydride
65. Microstructure and mechanical properties of 7475 aluminium alloy processed by SPD methods
66. Investigation of aqueous surface processes and corrosion mechanisms of Al-(Cu)-Fe-Cr quasicrystaline approximant
67. Characterization of the effects of hydrostatic extrusion on structure and surface properties of 303 austenitic stainless steel
68. The Effect of Hydrostatic Extrusion on the Corrosion Stability of Austenitic Stainless Steels
69. The Effect of Hydrostatic Extrusion on Resistance of 316 Austenitic Stainless Steel to Pit Nucleation
70. Nanomaterials in dental applications
71. Nanostructure formation in austenitic stainless steel
72. Evaluation of crystal structure and polytypism of SiC in microwave sintered diamond-SiC composite by TEM and HR-TEM
73. Hydrogen induced changes in 316L stainless steel microstructure
74. Statistical model of grain growth in polycrystalline nanomaterials
75. Repair and regeneration of osteochondral defects in the articular joints
76. Corrosion resistance of nanostructured titanium
77. Effect of surface treatment on the microstructure of TA6V
78. Predicting site occupation of Fe in B2 NiAl from ab initio computations
79. Structure and properties of polyurethane/YAG:Tb³⁺ nano-composites with luminescence properties
80. Structure and thermal properties of epoxy resins nano-composites with flame retardants
81. The influence of ZrO₂ containing 10% Eu ³⁺ on the polyurethane hard domain structure of nano-composites with luminescence properties
82. An influence of boehmite modification on the dispersion in the polyurethane matrix
83. Materials hardness estimation by simulation of the indentation process
84. Stability of second phase particles during processing by hydrostatic extrusion
85. The influence of nano - filler on microstructure homogeneity and selected properties of dental ceramic - polymer composites
86. Grain Boundary Migration in Nanocrystalline Iron
87. Thermal properties of L1₀-TiAl from first principle calculations
88. Structural stability of zirconia ceramic in water and acid solutions
89. The influence of the structure of metastable τ - phase on magnetic hysteretic properties of Мn_55.5Аl₄₄С_0.5 alloy
90. Morphology and chemical characterization of Ti surfaces modified for biomedical applications
91. Evaluation of degradation degree of dental hybrid composite used as permanent fillings
92. Optimization of particle reinforced lead-free solders
93. Microstructural evaluation during particles addition to lead-free solders
94. Thermal stability of hybrid polyurethane and modified boehmite
95. Applications of quantitative image analysis to the description of the morphology of hybrid polyurea-nitryle-urethanes
96. Improvement of wetting and bonding of SiO₂ ceramics and urea-urethane elastomer
97. A hybrid atomistic-continuum finite element modelling of locally disordered crystalline structure
98. The role of the weak points in the corrosion resistance of hydrostatically extruded steel porducts
99. The size effect in strength and fracture toughness of deformation origin submicro- and nanomaterials.
100. The influence of hydrostatic extrusion on mechanical properties and tribological characteristics of an austenitic stainless steel
101. Fabrication and micro-structure characterization of Al2O3/Ni-P composites with interpenetrating phases
102. Hydrostatic extrusion of intermetallic Ti-Al layers
103. PULSE PLASMA SINTERING OF A NANOCRYSTALLINE Cu POWDER
104. NANOCRYSTALLINE Cu-Al₂O₃ COMPOSITES SINTERED BY THE PULSE PLASMA TECHNIQUE
105. Mechanical properties of aluminium processed by equal channel angular pressing
106. Model for intermetallic phase and intermetallic compound solidification during diffusion soldering
107. Texture Development in Model Al-Li Alloy Subjected to Severe Plastic Deformation
108. The Influence of hydrostatic extrusion on microstructure of 6082 aluminum alloy
109. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
110. Microstructure refinement under high plastic strain rates in hydrostatic extrusion process
111. Influence of severe plastic deformation on PLC effect in Al 5XXX alloy
112. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
113. Formation of ultrafine gradient structure in hard magnetic alloy Fe-30%Cr-8%Co
114. Sintering temperature effect on structure and properties of Al2O3/Ni-P composites with interpenetrating phases
115. PLASTIC PROPERTIES OF GaN AND Al₂O₃ CRYSTAL: FEM-SIMULATION OF NANOINDENTATION CONFIRMED BY HIGH-RESOLUTION MICROSCOPY
116. SEM investigations of tooth/ filling bonding
117. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
118. Nanometals for medical applications
119. Effect of sever plastic deformation method on microstrucure and mechanical properties of Al and Cu
120. The influence of twin bands density on microstructure of 316LVM austenitic stainless steel subjected to transverse rolling
121. Microstructure evaluation in an Al-Li alloy processed by severe plastic deformation
122. Polymer matrix composites with nanoparticles of TiC obtained by a sol-gel method
123. Annealing temperature effect on residual stresses in 316L steel subjected to HPT process
124. FINITE ELEMENT MODELLING OF THE RESIDUAL STRESSES IN THE CERAMIC-ELASTOMER COMPOSITES
125. EFFECT OF INITIAL MICROSTRUCTURE ON MECHANICAL PROPERTIES OF THE Al-Cu-Mg-Mn ALLOY PROCESSED BY HYDROSTATIC EXTRUSION
126. THE INFLUENCE OF HIGH-ANGLE BOUNDARIES ON THE MECHANICAL PROPERTIES OF NANO-CRYSTALLINE IRON OBTAINED BY SEVERE PLASTIC DEFORMATION
127. Modelling the interaction of crack tip with nanostructure, which creating by deformation.
128. SHRINKAGE OF DENTAL POLYMERIC COMPOSITES
129. IN VIVO WEAR OF POLYETHYELNE GLENOID COMPONENTS IN TOTAL SHOULDER ARTHROPLASTY
130. Atomic-scale Ab-initio computations of the B2-RuAl
131. Ab-initio calculations of elastic properties Ni3Al and TiAl under pressure
132. Modelling of the Influence of the Grain Size Distribution on the Grain Growth in Nanocrystals
133. Ductility of Nanocrystalline Materials Processed by Severe Plastic Deformation
134. Structural-strength aspects of glass/metallic composite based on Co-Cr-Mo implantation alloy
135. Microstructure and mechanical properties of binary Al-Li alloys processed by ECAP
136. Microstructure of the ceramic - polymer composites for dental applications
137. Effect of Non-conventional Large Deformations on Microstructure and Properties of Metals
138. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
139. Morphology and properties of oxide films formed on the nanocrystalline 316L austenite steel
140. Al2O3-Fe functionally graded materials fabricated under magnetic field
141. Professor CZOCHRALSKI - Distinguished Scientist and Inventor, Founder of the Modern Materials Science
142. The influence of temperature and pressure on possibility of obtaining Al₂O₃/Ni-P nanocomposite through hot pressing process.
143. Mechanical properties nanostructured iron obtained by different methods of Severe Plastic Deformation
144. Strain localization in nanocrystalline iron after Severe Plastic Deformation
145. Non-elastic behaviours of high-porosity ceramics and ceramic-polymer composites
146. The Superplasticity of Hard Magnetic Alloy Fe-23wt.%Co-30%Cr with Submicrocrystalline Structure
147. Microstructure of Ni-P thin layers obtained by a chemical method
148. Hydrostatic extrusion and nanostructure formation in an aluminium alloy
149. Quantitative Description of Microstructure of Nano-materials
150. The Structure and Mechanical Properties of Low Carbon Low Alloy Steel Subjected to Severe Plastic Deformation
151. Studies of Ni-P Thin Films by Electroles Deposition Method
152. Stereology of Nanomaterials
153. Targeted Research Project: Metallic, Ceramic and Organic Nanomaterials: Processing - Structure - Properties - Applications
154. Materials Research in Poland