Thin films of transparent zinc oxide (ZnO) have been grown by potentiostatic cathodic deposition onto copper-coated PET (Polyethylene terephthalate) from a simple aqueous zinc nitrate electrolyte. The various optimum deposition parameters like potential, pH and bath temperature are investigated. Structural, morphological, compositional and optical characterizations of the films developed under different conditions were carried out to study such effects. The films were also tested for their potential use in photovoltaics.

• Legal notice:
  

  Copyright (c) Pielaszek Research, all rights reserved.
  The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
  In every case, proper references including Author(s) name(s) and URL of this webpage: https://science24.com/paper/18373 must be provided.

1. Electrical and optical properties of Li_xNi_1-xO₂/ In:Mg_xZn_1-xO heteroepitaxial junction grown on TiN buffered Si
2. Characteristics of Sm-doped BiFeO₃ ceramics prepared by a modified solid-state-reaction method
3. Wet pre-treatment of poly(butylene) terephthalate-poly(ethylene) terephthalate-polycarbonate co-polymer and subsequent metallization by electroplating
4. Magnetoresistivity of Cobalt/PTFE granular composite film produced by Pulsed Laser Deposition technique
5. Surfactant effect on synthesis of nanocrystalline La_xSr_1-xMnO₃ by hydrothermal method
6. In-doped transparent and conducting cubic Magnesium Zinc Oxide thin films grown by Pulse Laser Deposition