Applying the modified nano-composite particles into UV curable acrylic monomer or resin to achieve higher surface conductivity film on flexible plastic surface. The nano conductivity metal oxides are studied The modified colloidal metal oxides are prepared from through liquid phase acrylization. The film properties are depended on the compatibility of acrylates/nano-composite hybrid, the selection of proper acrylic resin and the curing factor. Curing by a UV light system is a suitable fabrication for plastic substrates due to it takes shorter exposed time and less heat deformation occurred then the multi-step thermal baking. The hybrid films will be investigated by FTIR, DSC, DPA, GPC, AFM, particle size measurement, hardness measurement.

• Legal notice:
  

  Copyright (c) Pielaszek Research, all rights reserved.
  The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
  In every case, proper references including Author(s) name(s) and URL of this webpage: https://science24.com/paper/3719 must be provided.

1. Diamine biomolecules surface functionalization single-walled carbon nanotube as gene-delivery vector