Abstract
In the present wok, a standard specimen subjected to tensile loading is analysed by performing finite element simulations. The deformation at the crack tip is studied . A set of available analytical results and the experimental data on the deformation of ultra high strength low alloy steel NiSiCrCoMo steel are used for the validation .It has been shown that the numerical simulation can be considered as equivalent to performing real experimentation

• Legal notice:
  

  Copyright (c) Pielaszek Research, all rights reserved.
  The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
  In every case, proper references including Author(s) name(s) and URL of this webpage: https://science24.com/paper/1943 must be provided.

1. Corrosion control by conducting polyaniline
2. Characterisation of conducting polyaniline coatings
3. Electrodeposition of conducting poly( 0 -toludine ) coatings on steel