Electro spinning is an efficient technique for the fabrication of polymer nano-fibres. The charges inside the polymer jet tend to repel each other so as to stretch and reduce the diameter of the polymer fibres. By rotating the collector at a fast angular speed, nano- fibres with specific orientation can be obtained. In this study, nano- fibres of Polyethylene oxide (PEO) with carbon black were prepared by electro spinning. PEO was dissolved in a mixture of water and ethanol. PEO is known as an electrolytic polymer. By blending with carbon black powders, its electrical properties along the fibre direction were improved. The fibre morphology and characteristics were studied by SEM and polarized FTIR.

• Legal notice:
  

  Copyright (c) Pielaszek Research, all rights reserved.
  The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
  In every case, proper references including Author(s) name(s) and URL of this webpage: https://science24.com/paper/15618 must be provided.

1. Wet pre-treatment of poly(butylene) terephthalate-poly(ethylene) terephthalate-polycarbonate co-polymer and subsequent metallization by electroplating
2. Magnetoresistivity of Cobalt/PTFE granular composite film produced by Pulsed Laser Deposition technique