"Magnetically soft nanomaterials for high-temperature applications"

Jarosław Ferenc 1Maciej Kowalczyk 1XiuBing Liang Tadeusz Kulik 1

1. Warsaw University of Technology, Faculty of Materials Science and Engineering (InMat), Wołoska 141, Warszawa 02-507, Poland


[Abstract body is empty now.]


Legal notice
  • Legal notice:

    Copyright (c) Pielaszek Research, all rights reserved.
    The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
    In every case, proper references including Author(s) name(s) and URL of this webpage: http://science24.com/paper/22022 must be provided.


Related papers
  1. Amorphous Al60Fe20Ti20 alloy obtained by consolidation of mechanically alloyed powder
  2. Structure and magnetic properties of Fe-Nb-B amorphous/nanocrystalline alloys produced by compaction of mechanically alloyed powders
  3. Formation and properties of the Cu-Zr-Ag-Ti bulk metallic glasses
  4. Bulk nanocrystalline Al-Si-Fe-mischmetal (Mm) alloys produced by high pressure hot compaction
  5. Amorphous Ni59Zr20Ti16M5 (M = Cu, Ag) alloys obtained by melt spinning and mechanical alloying
  6. Influence of Fe and Ag addition on the amorphization and thermal stability of CuTiZrNi powders processed by mechanical alloying
  7. Nanocrystalline Ni3Al-based alloys produced by mechanical alloying of Ni-Al-Co powders and consolidation
  8. Structural transformations and magnetic properties of Fe60Pt25-xB15+x alloys
  9. An attempt to improve the soft magnetic properties of iron-based bulk metallic glasses by annealing
  10. Influence of high presure hot compaction on microstructure of Al-Si-Ni-Mm alloys
  11. Phase transformations during mechanical alloying of nickel aluminides and subsequent heating of milling product
  12. Phase transformations in M2 steel powders subjected to ball milling
  13. Dependence of microhardness on annealing time of amorphous Al-Mm-Ni-(Fe,Co) alloys
  14. Bulk nanostructured Al-Mm-Ni-(Fe,Co) alloys produced by high-pressure hot compaction of amorphous powders
  15. Crystallization kinetics of Al95-x-yMmxNi5(Co,Fe)y series (x = 4, 5; y = 2, 3)
  16. Amorphous bulk alloys from Al-Mm-Ni system
  17. Magneticaly Soft Fe-Co-Based Nanocrystalline Alloys

Presentation: Oral at E-MRS Fall Meeting 2009, Symposium H, by Jarosław Ferenc
See On-line Journal of E-MRS Fall Meeting 2009

Submitted: 2009-09-11 14:53
Revised:   2009-09-11 14:53
Web science24.com
© 1998-2021 pielaszek research, all rights reserved Powered by the Conference Engine