Deformation of Materials by Means of Hydrostatic Extrusion – Practical Applications

Waclaw Pachla 

Polish Academy of Sciences, High Pressure Research Center (UNIPRESS), Sokolowska 29/37, Warszawa 01-142, Poland

Abstract

[Abstract body is empty now.]

 
 

Legal notice
  • Legal notice:

    Copyright (c) Pielaszek Research, all rights reserved.
    The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
    In every case, proper references including Author(s) name(s) and URL of this webpage: http://science24.com/paper/53 must be provided.

 

Related papers
  1. Bulk  nanostructured  titanium  fabricated  by  hydrostatic  extrusion
  2. Microstructure and mechanical properties of HE-treated titanium depending on its initial state
  3. Hydrostatic Extrusion as a method to produce UFG and NC metals
  4. The role of the weak points in the corrosion resistance of hydrostatically extruded steel porducts
  5. The influence of hydrostatic extrusion on mechanical properties and tribological characteristics of an austenitic stainless steel
  6. Hydrostatic extrusion of intermetallic Ti-Al layers
  7. The Influence of hydrostatic extrusion on microstructure of 6082 aluminum alloy
  8. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  9. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  10. Nanometals for medical applications
  11. EFFECT OF INITIAL MICROSTRUCTURE ON MECHANICAL PROPERTIES OF THE Al-Cu-Mg-Mn ALLOY PROCESSED BY HYDROSTATIC EXTRUSION
  12. Hydrostatic extrusion and nanostructure formation in an aluminium alloy

Presentation: oral at High Pressure School 1999 (3rd), by Waclaw Pachla
See On-line Journal of High Pressure School 1999 (3rd)

Submitted: 2003-02-16 17:33
Revised:   2009-06-08 12:55