Magnetic properties of anisotropic Nd-Fe-B resin bonded magnets

Marcin J. Dospial 2Danuta D. Płusa 2Urszula U. Kotlarczyk 2Barbara Ślusarek 3Tadeusz T. Mydlarz 1

1. International Laboratory of High Magnetic Fields and Low Temperatures (ML), Gajowicka 95, Wrocław 53-421, Poland
2. Institute of Physics, Częstochowa University of Technology, Al. Armii Krajowej 19, Częstochowa 42-200, Poland
3. Tele- & Radio-Technical Institute of Warsaw, Warszawa, Poland


The magnetic properties of an anisotropic, epoxy resin bonded magnet made from Magnequench powder of MQA-T type was investigated. The reversible magnetization processes and the magnetic parameters were examined by measurement of virgin magnetization curve, the major and minor hysteresis loops using a VSM mounted in a 14T electromagnet and the LakeShore VSM mounted in a 2T electromagnet. The coercivity and remanence versus the maximum magnetizing applied field were determined. As it results from the virgin magnetization curve shape and the field dependence of coercivity the magnetization reversal mechanism appeared to be the pinning one.

Legal notice
  • Legal notice:

    Copyrighted materials, (c) Pielaszek Research, all rights reserved.
    The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced, stored in or introduced into a retrieval or caching system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), or for any purpose, without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
    In every case, proper references including Author(s) name(s) and URL of this webpage: must be provided.


Related papers
  1. Study of the microstructure and magnetic properties of Fe60Co5Zr10Mo5B20 bulk amorphous and partially crystallized soft magnetic alloy.
  2. Study of the mechanical and magnetic properties of Fe61Co10Zr5-xHfxW2Y2B20 (x = 0, 3) bulk amorphous and crystalline alloys 
  3. Thermal stability and soft magnetic properties of  Fe61Co10Zr2,5Hf2,5Me4-xW2B20 (Me = Nb, Mo, Ti, Y, Ni) bulk amorphous alloys obtained by induction suction method.
  4. Study of the magnetic interaction in nanocrystalline Pr-Fe-Co-Nb-B permanent magnets.

Presentation: poster at E-MRS Fall Meeting 2005, Symposium B, by Marcin J. Dospial
See On-line Journal of E-MRS Fall Meeting 2005

Submitted: 2005-05-20 16:04
Revised:   2009-06-07 00:44
© 1998-2021 pielaszek research, all rights reserved Powered by the Conference Engine