Multifractal description of fracture morphology: quasi 3D analysis of fracture surface

Sebastian M. Stach 2Jan Cwajna 1Stanisław Roskosz 1Jerzy Cybo 2

1. Silesian University of Technology, Department of Materials Science, Krasińskiego 8, Katowice 40-019, Poland
2. Silesian University, Department of Materials Science, Śnieżna 2, Sosnowiec 41-200, Poland

Abstract

The paper presents verification of the multifractal analysis proposed in papers [1, 2]. It has been found that such analysis of simulated profiles formed by removing overlaps and secondary cracks from a real profile (which corresponds to a file obtained from a profilographometer), ensures a proper diversity of fractal characterization, adequately to the degree of fracture surface development of the investigated sintered carbide grades measured using a Taylor-Hobson’s Talysurf 2 profilographometer.

Legal notice
  • Legal notice:

    Copyright (c) Pielaszek Research, all rights reserved.
    The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
    In every case, proper references including Author(s) name(s) and URL of this webpage: http://science24.com/paper/1664 must be provided.

 

Related papers
  1. Application of a three-dimensional minimum spanning tree for reconstructing the crack pathway on fractures of WC-Co sintered carbides
  2. Taking advantage of the percolation phenomenon for simulating the crack process of brittle materials based on the example of sialon ceramics
  3. NEW POSSIBILITIES OF LIGHT MICROSCOPY RESEARCHES RESULTING FROM DIGITAL RECORDING OF IMAGES
  4. COMPUTATIONAL IMAGE ANALYSIS OF MATERIALS MICROSTRUCTURE
  5. Multifractal description of fracture morphology: full 3D analysis of fracture surface
  6. Factors affecting the accuracy and precision of quantitative description of materials microstructure

Presentation: poster at E-MRS Fall Meeting 2004, Symposium H, by Sebastian M. Stach
See On-line Journal of E-MRS Fall Meeting 2004

Submitted: 2004-04-18 20:02
Revised:   2009-06-08 12:55
Google
 
Web science24.com
© 1998-2022 pielaszek research, all rights reserved Powered by the Conference Engine