The results of the colaboraticve research of the COST Working Group partners are sumamrised and possible future projects proposed.

• Legal notice:
  

  Copyright (c) Pielaszek Research, all rights reserved.
  The above materials, including auxiliary resources, are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced without the express written permission of Pielaszek Research, the Publisher. Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations.
  In every case, proper references including Author(s) name(s) and URL of this webpage: https://science24.com/paper/12669 must be provided.

1. Optical oxygen sensor for safe operation in hazardous areas
2.   Optical oxygen sensor for safe operation  in hazardous areas
3. Quo Vadis nanotechnology- for various stakeholders
4. Opening of the Thursday Sessions of NanoPl 2014
5. Microwave reactors for nanoparticle's synthesis
6. Opening of Nano-Bio-Med session
7. Bioactive GoHAP nanoparticles and their applications in medical implants technology
8. Wykorzystanie metody NTA (Nanoparticle Tracking Analysis) w ocenie wielkości krążących mikrocząstek osocza i innych płynów fizjologicznych: pułapki i triki
9. Advanced characterisation of nanomaterials according to ISO 17025 Norm

10. Microwave solvothermal synthesis of resorbable nano-HAp with controlled grain size.
11. Microwave Solvothermal Synthesis of Nano Zinc Oxide Nanoparticles
12. Microwave Solvothermal Technology (MSS) for nanoparticle synthesis
13. [CEPT] Solvothermal synthesis nano zinc oxide in  microwave reactor MSS2
14. [CEPT] Solvothermal synthesis and characterization of nanomaterials in the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials
15. Scanning Electron Microscopy Investigations and Analysis of Nanostructures
16. Polish Nanotechnology Platform - a discussion group at Linked-In
17. Novel optical oxygen sensor for life and health protection made of nano-zirconia
18. Nanometrology as a tool for nanotechnology problems solving
19. Creating a Polish Nano-Bio-Technology and  Nano-Medicine Platform?
20. MSS synthesis of highly biocompatible nano-HAP and coating of 3D poymer scaffolds
21. Nanotechnologie w gospodarce województwa podlaskiego
22. Characterization of nanomaterials according to EU recommendations, on the example of ZnO nanoparticles
23. [CEPT] Nanohydroxyapatite-polylactide composites  for regenerative implants
24. [CEPT] MSS synthesis of highly biocompatible nano-HAP with properties depending on the synthesis time.
25. [CEPT] Studies of nanoparticles size distribution
26. [CEPT] Studies of solubility of nanoparticles and stability of their suspension
27. Iinvestigation of nanoparticles by DSC-TG methods accompanied by chemical analysis of emitted gas
28. Presentation of the  Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT
29. ZnO nanoparticles effect on integrity of human endothelial cells
30. Importance and trends in nanomedicine according  European Nanomedicine Platform survey
31. Application of the Zeiss Ultra Plus scanning microscopy in bio-nanotechnology 
32. Welcome address
33. Otwarcie NanoInfoDay, Powitanie
34. Characteristic of hydroxyapatite dense nanoceramic produced by The High Pressure Consolidation  
35. Wpływ parametrów materiałowo-technicznych na właściwości optycznego czujnika tlenu na bazie nano-ZrO₂
36. Synteza nano-ZnO przy pomocy reaktora Mettler Toledo w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT.
37. Infrastruktura i specjalizacje nanotechnologii w Polsce na podstawie wyników ankiety NANOFORCE
38. Solwotermalna synteza domieszkowanego nanotlenku cynku dla projektu NanoFATE. Otrzymywanie wodnych nanozawiesin domieszkowanego tlenku cynku.
39. Nanotechnologia bezpieczna dla ludzi i przyjazna środowisku
40. Badania rozkładu wielkości cząstek i potencjału zeta w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
41. Badanie stabilności i rozpuszczalności zawiesin z nano ZnO i nano ZnO:Co otrzymanych w  Laboratorium Nanostrutur dla Fotoniki i Nanomedycyny CePT
42. Badania nanoproszków przy pomocy technik DSC-TG/ QMS-FTIR w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
43. Synthesis of highly biocompatible hydroxyapatite nanopowders
44. Nanosafety - challenge of nowadays
45. Influence of heat treatment on luminescence of ZrO₂ + Eu nanopowders
46. Solvothermal synthesis of doped nano zinc oxide for the project NanoFATE.
47. Podsumowanie
48. Solwotermalna synteza domieszkowanego nano tlenku cynku dla projektu NanoFATE.
49. Hydrothermal Synthesis of Zinc Oxide Nanopowders
50. Optyczny sensor tlenu na bazie nanokrystalicznego ZrO₂
51. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
52. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
53. Procedury charakteryzacji nanoproszków
54. Oferty nanoproszków - Laboratorium Nanostruktur, Instytut Wysokich Ciśnien PAN
55. Nanofotonika dla małych i średnich przedsiębiorstw - mapy dorogowe i analizy SWOT  najważniejszych technologii.
56. Otwarcie konferencji
57. Polska  Platforma Nanotechnologii i zarys strategicznego programu "Nanotechnologia i wzrost inwestycji w B&R w Polsce"
58. Nowe mikrofalowe reaktory do syntez nanocząstek - wybrane zagadnienia badawcze i przykłady zastosowań
59. ZrO₂:Tb nanopowders obtained by coprecipitation method
60. ZnFe₂O₄/ZnO core-shell particles obtained by coprecipitation route
61. Hydrothermal Synthesis of ZnAl₂O₄ Spinel
62. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO₂ - EXAFS study
63. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
64. Excitation transfer in zirconia nanocrystals and ceramics
65. Eu Luminescence in zirconia nanocrystals
66. ZnO ceramic sintering and luminescence properties
67. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
68. Strategia rozwoju badań nanoproszków
69. Error bars in powder diffraction
70. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
71. Characterization of nanopowders
72. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
73. Synthesis of nanopowders in supercritical water in a continuous flow reactor
74. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
75. Doped zirconia nanopowders made in microwave – pressure reactor
76. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO₂ nanopowders doped with a range of metal ions
77. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
78. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
79. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
80. Luminescence properties of cerium doped Y₃Al₅O₁₂ nanopowders and nanoceramic
81. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
82. Advanced nanostructural zirconia ceramics for optical oxygen sensors
83. Study of undoped and doped zirconia nanocrystals luminescence
84. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
85. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO₂ - EXAFS study
86. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
87. Production of doped and non doped ceramics nanoparticles for optical applications
88. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
89. Characterization of nanocrystalline ZrO₂ doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
90. Particle Size Distribution of ZrO₂:Pr³⁺- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
91. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
92. Cathodoluminescence of Al doped ZnO nanopowders
93. Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods
94. Luminescence and structural properties of rare-earth doped YAG nanoceramics
95. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
96. The influence of ZrO₂ containing 10% Eu ³⁺ on the polyurethane hard domain structure of nano-composites with luminescence properties
97. Growth and properties of ytterbium doped KY(WO₄)₂ nanocomposites
98. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
99. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
100. Investigations of phase composition and grain size distribution in Pr doped ZrO2
101. Nasze wyniki, zdania i sposoby ich realizacji
102. Morphology of Al doped zinc oxide obtained by the vapour condensation method
103. The comparison of the properties of YAG obtained by coprecipitation and SCR method
104. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
105. Accuracy of XRD size measurements of nanocrystals
106. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
107. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
108. Preliminary research on zirconia based optical oxygen sensor
109. Preparation and electrical properties of the BaTiO3 nanoceramics
110. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
111. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
112. Time-resolved luminescence of nanostructured ZnO
113. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
114. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
115. Yttria stabilized zirconia nanocrystals luminescence
116. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
117. Optical investigations of RE-doped YAG nanoceramics
118. Electrical properties of nanocrystalline ZrO2 at high-pressure
119. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
120. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
121. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
122. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
123. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
124. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
125. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
126. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
127. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
128. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
129. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
130. Biocompatibility of thin films based on hydrothermal synthesized HAp
131. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
132. Fabrication and electrical properties of Eu³⁺:BaTiO₃ nanoceramics for SOFC
133. Luminescence of ZrO₂ nanocrystals
134. Molecular impurities in the luminescent ZnO nanocrystals
135. X-Ray investigations of the natural and artificial White Etching Layer
136. Diffusion and diffusion induced defects in GaN
137. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
138. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
139. Relaxation processes in ZrO2 at high pressures
140. Luminescence of ZrO2 and ZnO nanocrystals
141. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
142. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
143. New hydroxyapatite based nanomaterials for potential use in medical fields
144. Correlation between high-pressure ZrO2 electrical properties and crystallite size
145. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
146. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
147. Microstructure of Surface Layers of Raiways After Heavy Exploatation
148. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
149. Reaction Diffusion in Metallic Systems under High Pressure
150. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
151. Pressure Effect on Interface Energy, Diffusion and Reactions
152. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
153. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
154. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
155. Luminescense of Nanosize ZrO2
156. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
157. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
158. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
159. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
160. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)